HSS PEEK Arrowhead Disc Fixing Cable Ties
Two-piece PEEK cable ties with an arrowhead foot and disc for harness mounting.
- Arrowhead locks into the mounting hole.
- Movable tie head after bundling.
- Stated operating temperature −55 to +240 °C.
Descripción general
Two-piece PEEK cable ties with an arrowhead foot and disc for harness mounting.
Características
- Arrowhead locks into the mounting hole.
- Movable tie head after bundling.
- Stated operating temperature −55 to +240 °C.
- Source describes use for bundles from1 mm diameter.
Especificaciones técnicas
| Parameter | Specification |
|---|---|
| Listed configurations | 3 |
| Operating temperature | −55 to +240 °C |
Dimensión
Dimensions are in millimetres unless stated otherwise. Minimum loop strength is given in newtons and is not a mounting pull-out or working-load rating. Repeated model codes with different specifications are distinct listed configurations.
| Modelo | Width (mm) | Length (mm) | Max. bundle diameter (mm) | Min. loop strength (N) | Disc diameter (mm) | Hole diameter (mm) | Panel thickness (mm) | Material | Colour |
|---|---|---|---|---|---|---|---|---|---|
| HSS-3414507 | 3.4 | 145 | 35 | 230 | 16 | 6.3–6.7 | 0.7–1.3 | PEEK | Beige |
| HSS-3414517 | 3.4 | 145 | 35 | 230 | 16 | 6.3–6.7 | 1.7–2.3 | PEEK | Beige |
| HSS-3414512 | 3.4 | 145 | 32 | 230 | 16 | 6.3–6.7 | 1.2–1.8 | PEEK | Beige |
Guía de selección
Choose the fixing structure for the mounting surface, then check bundle capacity, hole or stud diameter, panel thickness and material where listed. Do not substitute minimum loop strength for mounting retention strength.
Ordering Information
Provide the complete model and applicable dimensions, material and colour when requesting a quotation.