Descripción general
The YOCL ELECTRIC 156-01158 rotatable cable tie with tube clip attaches an additional cable or hose bundle to an existing harness, tube or hose. The fixing clip accepts attachment diameters of 6.5–8.0 mm, while the cable tie accommodates bundle diameters of 2.0–35.0 mm.
A 360° rotating connection allows the secondary bundle to be positioned in different directions relative to the attachment point. This two-piece configuration supports automotive harness routing and industrial cable management without a dedicated panel mounting hole.
Características
- 360° rotation: adjust the routing direction of the secondary cable or hose bundle.
- Clip-on fixing: attach to a compatible existing harness, tube or hose with a 6.5–8.0 mm outside diameter.
- Inside-serrated tie: secure bundles within the 2.0–35.0 mm diameter range.
- Heat-stabilized materials: PA66HS / PA66HIRHS polyamide construction.
- Compact tie dimensions: 155.0 mm length and 4.7 mm width, with 222 N minimum tensile strength.
Especificaciones técnicas
Materials
The supplied material combination is PA66HS (heat-stabilized polyamide 6.6) and PA66HIRHS (high-impact modified, heat-stabilized polyamide 6.6).
Aplicaciones
- Automotive wire harness routing.
- Attaching secondary cables to existing harnesses.
- Cable-to-hose and cable-to-tube fixing.
- Industrial machinery and electrical equipment cable management.
Ordering Information
Specify part number 156-01158, black color and the required quantity. Check the fixing clip attachment diameter and the secondary bundle diameter separately. The listed 222 N value is the minimum tensile-strength specification; it does not establish a clip pull-off force or permitted assembly load.
