Descripción general
La YOCL ELECTRIC 156-00617 Brida de cable de montaje lateral en borde, dentado interior secures cables and wire harnesses alongside panel edges. The pre-assembled two-piece construction combines an inside-serrated cable tie and an edge fixing with an internal metal retaining clamp.
The fixing fits panel edges 1.0–3.0 mm thick without a dedicated mounting hole. The tie accepts Ø4.0–45.0 mm bundles, measures 200.0 × 4.6 × 1.2 mm and has a minimum tensile strength of 225 N. Its head can be repositioned after bundling for final routing alignment.
Características
- Side-mount configuration positions the bundle alongside the panel edge.
- Integrated metal clamp grips the edge without separate mounting screws or an adhesive base.
- Inside serrations engage the locking head to retain the bundle.
- Pre-assembled two-piece construction allows head repositioning after bundling.
- Black PA66HS cable tie and PA66HIRHS fixing element.
- Operating temperature -40°C to +105°C; UL 94 HB material flammability classification; RoHS compliant.
Especificaciones técnicas
Dimensión
Notas de instalación
- Select a panel edge 1.0–3.0 mm thick and position the side-mount fixing at the required location.
- Push the fixing onto the edge and confirm that the integrated metal clamp is engaged.
- Wrap the tie around the cable or wire harness and tighten it through the locking head.
- Reposition the tie head if needed, then check that the fixing and bundle are securely retained.
Aplicaciones
- Automotive wire harnesses and vehicle electrical systems.
- Panel-edge cable routing in electrical equipment.
- Industrial machinery and panel building.
- Transportation equipment and appliance wiring.
Información de pedido
For enquiries, specify part number 156-00617, quantity, panel thickness, bundle diameter and available installation clearance.
