Terminales de Anilla de Nylon RNY/RNYD
YOCL ELECTRIC RNY/RNYD Nylon Ring Terminals combine RNY single-crimp and RNYD double-crimp constructions in one series. The 47 matched model pairs cover three conductor groups from 0.5 to 6 mm², with copper terminals and nylon insulation.
- Choose by conductor range, crimp construction and bolt-hole diameter.
- Compare model-specific B, F and L dimensions plus group-specific E, D1 and D2.
- The source lists 600 V and 105°C for all three groups; Imax varies by group.
Descripción general
YOCL ELECTRIC RNY/RNYD Nylon Ring Terminals are copper ring terminals with nylon insulating sleeves for bolted conductor connections. RNY is the single-crimp construction; RNYD is the double-crimp construction with a copper tube and sleeve described in the supplied catalog. The two columns contain 47 matched model pairs across 0.5–6 mm² conductor groups.
Características
- Nylon insulation: the catalog identifies nylon insulating sleeves, a 105°C temperature figure and 600 V for each of the three conductor groups.
- Two crimp constructions: RNY and RNYD are paired by listed bolt fit and B, F and L dimensions, with separate D1 and D2 barrel dimensions.
- Copper contact: the conductive terminal material is listed as copper.
- Group-specific selection: conductor range, Imax and material thickness differ by group and are listed below.
Especificaciones técnicas
| Parameter | Specification |
|---|---|
| Product type | Nylon-insulated ring terminal |
| Series | RNY single crimp; RNYD double crimp |
| Listed models | 47 RNY and 47 RNYD |
| Terminal material | Copper |
| Insulation | Nylon |
| Voltage stated in catalog | 600 V |
| Temperature stated in catalog | 105°C |
| RNYD construction | Copper tube with sleeve, described as double pressure in the source |
| Drawing dimension units | mm |
Imax is the catalog’s maximum-current label. Each current figure applies to its own conductor group; test or installation conditions are not supplied.
| Model group | Color | Conductor range | AWG | Imax | Material thickness | E (mm) | D1 (mm), RNY | D2 (mm), RNYD |
|---|---|---|---|---|---|---|---|---|
| RNY/RNYD 1.25 | Red | 0.5–1.5 mm² | AWG 22–16 | 19 A | 0.7 mm | 11.0 | 4.3 | 4.8 |
| RNY/RNYD 2 | Blue | 1.5–2.5 mm² | AWG 16–14 | 27 A | 0.8 mm | 11.0 | 4.9 | 5.6 |
| RNY/RNYD 5.5 | Yellow | 4–6 mm² | AWG 12–10 | 48 A | 1.0 mm | 14.0 | 6.9 | 7.2 |
Dimensión
The table preserves the catalog’s US bolt number and metric hole diameter d2 for each model pair. B, F and L are model-specific; E, D1 and D2 are shared within each conductor group in the table above. All dimensions are in millimeters.
| RNY single-crimp model | RNYD double-crimp model | Color | US bolt no. | Hole d2 (mm) | B (mm) | F (mm) | L (mm) |
|---|---|---|---|---|---|---|---|
| RNY 1.25-3 | RNYD 1.25-3 | Red | #4 | 3.2 | 5.7 | 4.95 | 18.8 |
| RNY 1.25-3.5S | RNYD 1.25-3.5S | Red | #6 | 3.7 | 5.7 | 4.95 | 18.8 |
| RNY 1.25-3.5M | RNYD 1.25-3.5M | Red | #6 | 3.7 | 6.6 | 6.3 | 20.6 |
| RNY 1.25-3.5L | RNYD 1.25-3.5L | Red | #6 | 3.7 | 8.0 | 7.0 | 22.0 |
| RNY 1.25-4S | RNYD 1.25-4S | Red | #8 | 4.3 | 6.6 | 6.3 | 20.6 |
| RNY 1.25-4L | RNYD 1.25-4L | Red | #8 | 4.3 | 8.0 | 7.0 | 22.0 |
| RNY 1.25-5S | RNYD 1.25-5S | Red | #10 | 5.3 | 8.0 | 7.0 | 22.0 |
| RNY 1.25-5L | RNYD 1.25-5L | Red | #10 | 5.3 | 9.5 | 8.5 | 23.2 |
| RNY 1.25-5LL | RNYD 1.25-5LL | Red | #10 | 5.3 | 11.6 | 11.1 | 28.0 |
| RNY 1.25-6S | RNYD 1.25-6S | Red | 1/4 | 6.5 | 9.5 | 8.5 | 23.2 |
| RNY 1.25-6L | RNYD 1.25-6L | Red | 1/4 | 6.5 | 11.6 | 11.1 | 28.0 |
| RNY 1.25-8 | RNYD 1.25-8 | Red | 5/16 | 8.5 | 11.6 | 11.1 | 28.0 |
| RNY 1.25-10 | RNYD 1.25-10 | Red | 3/8 | 10.5 | 13.6 | 13.9 | 31.7 |
| RNY 1.25-10L | RNYD 1.25-10L | Red | 3/8 | 10.5 | 19.2 | 16.0 | 36.6 |
| RNY 1.25-12 | RNYD 1.25-12 | Red | 1/2 | 13.0 | 19.2 | 16.0 | 36.6 |
| RNY 1.25-14 | RNYD 1.25-14 | Red | 9/16 | 15.0 | 27.0 | 21.0 | 45.5 |
| RNY 1.25-16 | RNYD 1.25-16 | Red | 5/8 | 17.0 | 27.0 | 21.0 | 45.5 |
| RNY 1.25-20 | RNYD 1.25-20 | Red | 3/4 | 21.0 | 27.0 | 21.0 | 45.5 |
| RNY 2-3 | RNYD 2-3 | Blue | #4 | 3.2 | 6.6 | 4.3 | 18.7 |
| RNY 2-3.5S | RNYD 2-3.5S | Blue | #6 | 3.7 | 6.6 | 4.3 | 18.7 |
| RNY 2-3.5M | RNYD 2-3.5M | Blue | #6 | 3.7 | 6.6 | 6.3 | 20.7 |
| RNY 2-3.5L | RNYD 2-3.5L | Blue | #6 | 3.7 | 8.5 | 7.4 | 22.7 |
| RNY 2-4S | RNYD 2-4S | Blue | #8 | 4.3 | 6.6 | 6.3 | 20.7 |
| RNY 2-4L | RNYD 2-4L | Blue | #8 | 4.3 | 8.5 | 7.4 | 22.7 |
| RNY 2-5S | RNYD 2-5S | Blue | #10 | 5.3 | 8.5 | 7.4 | 22.7 |
| RNY 2-5L | RNYD 2-5L | Blue | #10 | 5.3 | 9.5 | 7.4 | 23.2 |
| RNY 2-6S | RNYD 2-6S | Blue | 1/4 | 6.5 | 9.5 | 7.4 | 23.2 |
| RNY 2-6L | RNYD 2-6L | Blue | 1/4 | 6.5 | 12.0 | 11.0 | 28.0 |
| RNY 2-8 | RNYD 2-8 | Blue | 5/16 | 8.5 | 12.0 | 11.0 | 28.0 |
| RNY 2-10 | RNYD 2-10 | Blue | 3/8 | 10.5 | 13.6 | 13.9 | 31.7 |
| RNY 2-10L | RNYD 2-10L | Blue | 3/8 | 10.5 | 19.2 | 16.0 | 36.6 |
| RNY 2-12 | RNYD 2-12 | Blue | 1/2 | 13.0 | 19.2 | 16.0 | 36.6 |
| RNY 2-14 | RNYD 2-14 | Blue | 9/16 | 15.0 | 27.0 | 21.0 | 45.5 |
| RNY 2-16 | RNYD 2-16 | Blue | 5/8 | 17.0 | 27.0 | 21.0 | 45.5 |
| RNY 2-20 | RNYD 2-20 | Blue | 3/4 | 21.0 | 27.0 | 21.0 | 45.5 |
| RNY 5.5-3.5 | RNYD 5.5-3.5 | Yellow | #6 | 3.7 | 7.2 | 6.1 | 23.7 |
| RNY 5.5-4S | RNYD 5.5-4S | Yellow | #8 | 4.3 | 7.2 | 6.1 | 23.7 |
| RNY 5.5-4L | RNYD 5.5-4L | Yellow | #8 | 4.3 | 9.5 | 8.3 | 27.0 |
| RNY 5.5-5 | RNYD 5.5-5 | Yellow | #10 | 5.3 | 9.5 | 8.3 | 27.0 |
| RNY 5.5-6 | RNYD 5.5-6 | Yellow | 1/4 | 6.5 | 12.0 | 10.5 | 30.5 |
| RNY 5.5-6M | RNYD 5.5-6M | Yellow | 1/4 | 6.5 | 12.0 | 13.0 | 33.0 |
| RNY 5.5-8 | RNYD 5.5-8 | Yellow | 5/16 | 8.5 | 15.0 | 13.7 | 36.0 |
| RNY 5.5-10 | RNYD 5.5-10 | Yellow | 3/8 | 10.5 | 15.0 | 13.7 | 36.0 |
| RNY 5.5-12 | RNYD 5.5-12 | Yellow | 1/2 | 13.0 | 19.2 | 16.0 | 40.4 |
| RNY 5.5-14 | RNYD 5.5-14 | Yellow | 9/16 | 15.0 | 32.0 | 25.2 | 55.2 |
| RNY 5.5-16 | RNYD 5.5-16 | Yellow | 5/8 | 17.0 | 32.0 | 25.2 | 55.2 |
| RNY 5.5-20 | RNYD 5.5-20 | Yellow | 3/4 | 21.0 | 32.0 | 25.2 | 55.2 |
Guía de selección
Choose RNY or RNYD construction and the conductor group first. Then match the listed bolt-hole diameter d2 with the intended bolt or stud and compare B, F, L and the applicable sleeve dimensions with available connection space. Use the exact model code when ordering.
Ordering Information
Specify the RNY or RNYD model and quantity when requesting a quotation.