DL Series Busbar Clamps
DL series busbar clamps provide grooved mounting components for supporting and positioning busbars.
- Eighteen model designations in six drawing families.
- Lengths from 155 to 400 mm.
- Profile width: 30 mm; height: 35 mm.
- Groove widths A: 6, 7, 8, 10 or 12 mm.
- Model-specific groove depth and mounting dimensions.
Aperçu
YOCL ELECTRIC DL series busbar clamps are grooved mounting components for supporting and positioning busbars. Eighteen model designations cover six drawing families, with lengths from 155 to 400 mm.
The D3, D4, S3 and S4 families list groove widths A of 6, 8, 10 or 12 mm. The separate 7D3 and 7D4 models list 7 mm grooves and different groove depth labels.
Caractéristiques
- Eighteen model designations in six drawing families.
- Lengths from 155 to 400 mm.
- Listed profile width of 30 mm and height of 35 mm.
- Model-specific groove width, depth and mounting dimensions.
- Separate 7D3 and 7D4 compact designs.
Spécifications techniques
| Parameter | Specification |
|---|---|
| Series | DL busbar clamps |
| Function | Support and positioning of busbars |
| Model count | 18 |
| Listed groove widths A | 6, 7, 8, 10 or 12 mm, depending on model |
| Colour | Red as illustrated |
Dimension
| Model | Length (mm) | Width (mm) | Height (mm) | Groove width A (mm) | Groove depth label (mm) | Hole diameter φ (mm) | Hole centre spacing (mm) | Repeated groove spacing (mm) |
|---|---|---|---|---|---|---|---|---|
| 6D3 | 220 | 30 | 35 | 6 | 10 | 11.5 | 80 | 80 |
| 8D3 | 220 | 30 | 35 | 8 | 10 | 11.5 | 80 | 80 |
| 10D3 | 220 | 30 | 35 | 10 | 10 | 11.5 | 80 | 80 |
| 12D3 | 220 | 30 | 35 | 12 | 10 | 11.5 | 80 | 80 |
| 6D4 | 300 | 30 | 35 | 6 | 10 | 11 | 160 | 80 |
| 8D4 | 300 | 30 | 35 | 8 | 10 | 11 | 160 | 80 |
| 10D4 | 300 | 30 | 35 | 10 | 10 | 11 | 160 | 80 |
| 12D4 | 300 | 30 | 35 | 12 | 10 | 11 | 160 | 80 |
| 6S3 | 295 | 30 | 35 | 6 | 10 | 11 | 105 | 105 |
| 8S3 | 295 | 30 | 35 | 8 | 10 | 11 | 105 | 105 |
| 10S3 | 295 | 30 | 35 | 10 | 10 | 11 | 105 | 105 |
| 12S3 | 295 | 30 | 35 | 12 | 10 | 11 | 105 | 105 |
| 6S4 | 400 | 30 | 35 | 6 | 10 | 10.5 | 210 | 105 |
| 8S4 | 400 | 30 | 35 | 8 | 10 | 10.5 | 210 | 105 |
| 10S4 | 400 | 30 | 35 | 10 | 10 | 10.5 | 210 | 105 |
| 12S4 | 400 | 30 | 35 | 12 | 10 | 10.5 | 210 | 105 |
| 7D3 | 155 | 30 | 35 | 7 | 5 | 9 | 60 | 60 |
| 7D4 | 215 | 30 | 35 | 7 | 6 | 9 | 120 | 60 |
The first four drawing families use an A dimension key for the four model prefixes 6, 8, 10 and 12. The 7D3 and 7D4 drawings explicitly show a 7 mm groove width. Groove spacing and hole centre spacing are separate dimensions.
Selection Guide
Select the complete model by length, groove width and mounting hole arrangement. D3 and D4 models list 80 mm repeated groove spacing; S3 and S4 list 105 mm. The 7D3 and 7D4 models list 60 mm groove spacing, with groove depth labels of 5 and 6 mm respectively.
Ordering Information
For a quotation, specify the full DL model designation, quantity, busbar dimensions and mounting layout. Retain the D or S family suffix when specifying the model.