156-01032 360° Rotatable Cable Tie with Tube Clip

The YOCL ELECTRIC 156-01032 rotatable cable tie with tube clip attaches a secondary cable, harness or hose bundle to an existing tube, hose or harness.

360° rotation allows routing adjustments relative to the mounting point.
Omega-style clip fits 10.0–14.0 mm attachment diameters; tie bundle range 2.0–35.0 mm.
Inside-serrated 155 × 4.7 × 1.35 mm tie; 222 N minimum tensile strength.
Noir PA66 tie / PA66HIRHS fixing element.
UL 94 HB classification and RoHS compliance; no panel mounting hole required.

Renseignez-vous sur ce produit

Aperçu

The YOCL ELECTRIC 156-01032 360° Rotatable Cable Tie with Tube Clip is a pre-assembled, two-piece fastening for attaching a secondary cable, wire harness or hose bundle to an existing tube, hose or harness. The Omega-style clip fits an attachment outside diameter of 10.0–14.0 mm, while the cable tie secures bundles 2.0–35.0 mm in diameter.

The 360° rotatable connection allows the cable tie and secured bundle to change direction relative to the mounting point. The clip-on fixing uses the existing round component as its support, without a panel hole, mounting screw or adhesive base. The black assembly combines a PA66 cable tie with a PA66HIRHS fixing element.

Caractéristiques

360° rotation: supports multidirectional routing of the attached bundle.
Omega-style tube clip: attaches directly to a compatible tube, hose or existing harness.
Inside-serrated tie: secures 2.0–35.0 mm bundles using a plastic-pawl closure.
Two-piece construction: combines a dedicated clip-on fixing with a cable tie.
Separate material grades: PA66 for the tie and high-impact modified, heat-stabilized PA66HIRHS for the clip.
No panel fixing point required: uses the existing tube or harness as the mounting point.

Spécifications techniques

Paramètre	Spécification
Marque	YOCL ÉLECTRIQUE
Numéro de pièce	156-01032
Product type	360° rotatable cable tie with tube clip
Construction	Pre-assembled, two-piece assembly
Mode de fixation	Clip-on tube / hose fixing
Clip type	Omega-style clip
Rotation	360°
Attachment outside diameter	10.0–14.0 mm
Bundle diameter	2.0–35.0 mm
Minimum cable tie tensile strength	222 N
Cable tie material	PA66 — Polyamide 6.6
Fixing element material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Couleur	Noir
Serration	Inside serrated
Closure	Plastic pawl
Flammability classification	UL 94 HB
RoHS	Compliant
Panel mounting hole required	No

Dimension

Dimension	Value
Cable tie length (L)	155 mm
Cable tie width (W)	4.7 mm
Cable tie thickness (T)	1.35 mm
Clip-on attachment diameter range	10.0–14.0 mm
Bundle diameter range	2.0–35.0 mm

Notes d'installation

Select a compatible tube, hose or harness with an outside diameter of 10.0–14.0 mm.
Position the Omega-style clip and clip it onto the existing component.
Wrap the tie around the secondary bundle, insert the strap through the locking head and tighten it.
Rotate the connection to obtain the required routing direction.
Check that the clip and cable bundle are retained.

The 222 N specification refers to minimum cable tie tensile strength; it is not a clip pull-off load or installation tension.

Applications

Automotive secondary wire harness routing.
Tube-mounted and hose-mounted cable routing.
Additional cable attachment to existing harnesses.
Cable management in industrial machinery and electrical equipment.
Harness assembly for transportation equipment.

Informations de commande

Specify 156-01032, the required quantity, attachment outside diameter and bundle diameter when requesting a quotation. This model has a black PA66 tie and PA66HIRHS fixing element, a 155 mm inside-serrated strap, and a 360° rotatable clip for 10.0–14.0 mm attachment diameters.