EN Non-Insulated Cord End Ferrules
YOCL ELECTRIC EN Non-Insulated Cord End Ferrules are tubular wire ferrules with a flared entry. The 68 listed models cover conductor sections from 0.2 to 185 mm², with several tube lengths for each size.
- Uninsulated tubular design with a flared wire entry.
- Model-specific L, D, C and W dimensions.
- Select by conductor section, AWG designation and tube length.
Aperçu
YOCL ELECTRIC EN Non-Insulated Cord End Ferrules are tubular wire ferrules for terminating conductors. A flared entry is shown in the dimension drawing. The EN series covers 0.2–185 mm² across 68 listed models, with different lengths for each conductor section.
Caractéristiques
- Uninsulated tube: a bare cord end ferrule without an insulating collar.
- Flared entry: the mouth width W is specified separately from the tube diameter D.
- Multiple lengths: select the L dimension required for the connection.
Spécifications techniques
| Parameter | Specification |
|---|---|
| Series | EN |
| Product type | Non-insulated cord end ferrule |
| Insulation | None |
| Conductor sections | 0.2–185 mm² across the series |
| Listed models | 68 |
Dimension
All dimensions are in millimeters. L is overall length; D and C are the outside and inside tube diameters shown in the drawing; W is the flared entry width.
| Model | Lead section (mm²) | AWG | L (mm) | D (mm) | C (mm) | W (mm) |
|---|---|---|---|---|---|---|
| EN0206 | 0.2 | #26 | 6.0 | 1.1 | 0.8 | 1.4 |
| EN0207 | 0.2 | #26 | 7.0 | 1.1 | 0.8 | 1.4 |
| EN0208 | 0.2 | #26 | 8.0 | 1.1 | 0.8 | 1.4 |
| EN0306 | 0.3 | #24 | 6.0 | 1.3 | 1.0 | 1.5 |
| EN0308 | 0.3 | #24 | 8.0 | 1.3 | 1.0 | 1.5 |
| EN0505 | 0.5 | #22 | 5.0 | 1.3 | 1.0 | 1.7 |
| EN0506 | 0.5 | #22 | 6.0 | 1.3 | 1.0 | 1.7 |
| EN0508 | 0.5 | #22 | 8.0 | 1.3 | 1.0 | 1.7 |
| EN0510 | 0.5 | #22 | 10.0 | 1.3 | 1.0 | 1.7 |
| EN0512 | 0.5 | #22 | 12.0 | 1.3 | 1.0 | 1.7 |
| EN7506 | 0.75 | #20 | 6.0 | 1.5 | 1.2 | 1.9 |
| EN7508 | 0.75 | #20 | 8.0 | 1.5 | 1.2 | 1.9 |
| EN7510 | 0.75 | #20 | 10.0 | 1.5 | 1.2 | 1.9 |
| EN7512 | 0.75 | #20 | 12.0 | 1.5 | 1.2 | 1.9 |
| EN1006 | 1.0 | #18 | 6.0 | 1.8 | 1.5 | 2.2 |
| EN1008 | 1.0 | #18 | 8.0 | 1.8 | 1.5 | 2.2 |
| EN1010 | 1.0 | #18 | 10.0 | 1.8 | 1.5 | 2.2 |
| EN1012 | 1.0 | #18 | 12.0 | 1.8 | 1.5 | 2.2 |
| EN1507 | 1.5 | #16 | 7.0 | 2.0 | 1.7 | 2.5 |
| EN1508 | 1.5 | #16 | 8.0 | 2.0 | 1.7 | 2.5 |
| EN1510 | 1.5 | #16 | 10.0 | 2.0 | 1.7 | 2.5 |
| EN1512 | 1.5 | #16 | 12.0 | 2.0 | 1.7 | 2.5 |
| EN1518 | 1.5 | #16 | 18.0 | 2.0 | 1.7 | 2.5 |
| EN2507 | 2.5 | #14 | 7.0 | 2.6 | 2.3 | 3.3 |
| EN2508 | 2.5 | #14 | 8.0 | 2.6 | 2.3 | 3.3 |
| EN2510 | 2.5 | #14 | 10.0 | 2.6 | 2.3 | 3.3 |
| EN2512 | 2.5 | #14 | 12.0 | 2.6 | 2.3 | 3.3 |
| EN2518 | 2.5 | #14 | 18.0 | 2.6 | 2.3 | 3.3 |
| EN4009 | 4.0 | #12 | 9.0 | 3.2 | 2.8 | 3.9 |
| EN4012 | 4.0 | #12 | 12.0 | 3.2 | 2.8 | 3.9 |
| EN4018 | 4.0 | #12 | 18.0 | 3.2 | 2.8 | 3.9 |
| EN6010 | 6.0 | #10 | 10.0 | 3.9 | 3.5 | 4.8 |
| EN6012 | 6.0 | #10 | 12.0 | 3.9 | 3.5 | 4.8 |
| EN6015 | 6.0 | #10 | 15.0 | 3.9 | 3.5 | 4.8 |
| EN6018 | 6.0 | #10 | 18.0 | 3.9 | 3.5 | 4.8 |
| EN10-12 | 10.0 | #7 | 12.0 | 4.9 | 4.5 | 5.8 |
| EN10-15 | 10.0 | #7 | 15.0 | 4.9 | 4.5 | 5.8 |
| EN10-18 | 10.0 | #7 | 18.0 | 4.9 | 4.5 | 5.8 |
| EN16-12 | 16.0 | #5 | 12.0 | 6.2 | 5.8 | 7.2 |
| EN16-15 | 16.0 | #5 | 15.0 | 6.2 | 5.8 | 7.2 |
| EN16-18 | 16.0 | #5 | 18.0 | 6.2 | 5.8 | 7.2 |
| EN25-16 | 25.0 | #4 | 16.0 | 7.9 | 7.5 | 9.1 |
| EN25-22 | 25.0 | #4 | 22.0 | 7.9 | 7.5 | 9.1 |
| EN35-16 | 35.0 | #2 | 16.0 | 8.7 | 8.3 | 10.2 |
| EN35-25 | 35.0 | #2 | 25.0 | 8.7 | 8.3 | 10.2 |
| EN50-20 | 50.0 | #1 | 20.0 | 10.9 | 10.3 | 12.4 |
| EN50-25 | 50.0 | #1 | 25.0 | 10.9 | 10.3 | 12.4 |
| EN50-30 | 50.0 | 1/0 | 30.0 | 10.9 | 10.3 | 12.7 |
| EN50-32 | 50.0 | 1/0 | 32.0 | 10.9 | 10.3 | 12.7 |
| EN70-22 | 70.0 | 2/0 | 22.0 | 14.3 | 13.5 | 15.8 |
| EN70-25 | 70.0 | 2/0 | 25.0 | 14.3 | 13.5 | 15.8 |
| EN70-30 | 70.0 | 2/0 | 30.0 | 14.3 | 13.5 | 15.8 |
| EN70-32 | 70.0 | 2/0 | 32.0 | 14.3 | 13.5 | 15.8 |
| EN95-25 | 95.0 | 3/0 | 25.0 | 15.3 | 14.5 | 17.3 |
| EN95-30 | 95.0 | 3/0 | 30.0 | 15.3 | 14.5 | 17.3 |
| EN95-32 | 95.0 | 3/0 | 32.0 | 15.3 | 14.5 | 17.3 |
| EN95-34 | 95.0 | 3/0 | 34.0 | 15.3 | 14.5 | 17.3 |
| EN120-30 | 120.0 | 4/0 | 30.0 | 17.5 | 16.5 | 20.2 |
| EN120-32 | 120.0 | 4/0 | 32.0 | 17.5 | 16.5 | 20.2 |
| EN120-34 | 120.0 | 4/0 | 34.0 | 17.5 | 16.5 | 20.2 |
| EN120-38 | 120.0 | 4/0 | 38.0 | 17.5 | 16.5 | 20.2 |
| EN120-40 | 120.0 | 4/0 | 40.0 | 17.5 | 16.5 | 20.2 |
| EN150-32 | 150.0 | 250/300 | 32.0 | 20.6 | 19.6 | 23.0 |
| EN150-34 | 150.0 | 250/300 | 34.0 | 20.6 | 19.6 | 23.0 |
| EN150-38 | 150.0 | 250/300 | 38.0 | 20.6 | 19.6 | 23.0 |
| EN150-40 | 150.0 | 250/300 | 40.0 | 20.6 | 19.6 | 23.0 |
| EN185-32 | 185.0 | 250/300 | 32.0 | 21.4 | 20.2 | 23.9 |
| EN185-40 | 185.0 | 250/300 | 40.0 | 21.4 | 20.2 | 23.9 |
Selection Guide
Select the conductor section and check the listed L, D, C and W dimensions against the intended termination. The 50 mm² entries include two mouth widths and AWG designations; use the complete model number when ordering.
Ordering Information
Provide the full EN model and required quantity when requesting a quotation.