Cable Gland Earth Tag
Cable gland earth tags are listed in nine size groups from M20 to M100. Use the table to compare the catalogue's Metric, G and NPT size designations and the A, B and H dimensions.
- Ring-and-tab form with a connection hole, as shown in the reference drawing.
- Catalogue thickness is 1 mm for M20/M25 and 1.5 mm for larger listed sizes.
- Select the exact tag size and confirm the gland fit and bonding arrangement before ordering.
Aperçu
This cable gland earth tag is a ring-and-tab accessory for a gland installation. The supplied catalogue lists nine size groups, with Metric, G and NPT designations and dimensions to aid selection. The tag has a separate hole in the tab, as shown in the reference drawing.
The size table does not give an electrical current rating, material specification or bonding test result. Choose the tag and the complete earthing arrangement to suit the installation requirements.
Caractéristiques
- Ring-and-tab form provides a defined point for the earthing connection.
- Nine catalogue size groups cover M20 through M100.
- G and NPT designations are shown alongside each Metric size for selection.
- A, B, H and thickness dimensions are listed for physical fit checks.
Spécifications techniques
| Parameter | Catalogue information |
|---|---|
| Product type | Cable gland earth tag |
| Listed Metric size groups | M20, M25, M32, M40, M50, M63, M75, M90 and M100 |
| Thickness | 1 or 1.5 mm, depending on size |
| Material, current rating and certification | Not specified in the supplied page |
Dimension
All A, B, H and thickness values below are in millimetres. G and NPT entries are catalogue size designations, not measured dimensions.
| Metric | G | NPT | A | B | H | Thickness |
|---|---|---|---|---|---|---|
| M20 | G1/2 | NPT1/2 | 20.9 | 7 | 53.4 | 1 |
| M25 | G3/4 | NPT3/4 | 25.9 | 7 | 59.4 | 1 |
| M32 | G1 | NPT1 | 32.9 | 12.9 | 76.9 | 1.5 |
| M40 | G1 1/4 | NPT1 1/4 | 40.9 | 14 | 88.6 | 1.5 |
| M50 | G1 1/2 | NPT1 1/2 | 50.9 | 14 | 111 | 1.5 |
| M63 | G2 | NPT2 | 63.9 | 14 | 128.4 | 1.5 |
| M75 | G2 1/2 | NPT2 1/2 | 75.8 | 19.9 | 151.7 | 1.5 |
| M90 | G3 | NPT3 | 90 | 20 | 182 | 1.5 |
| M100 | G3 1/2 | NPT3 1/2 | 101.5 | 20 | 194 | 1.5 |
Selection Guide
Match the tag to the gland and entry size, then check A for the ring fit and B/H for clearance around the connection point. Obtain the required bonding hardware and verify the complete earthing method for the installation.
Ordering Information
Specify the required size designation and quantity. For installations with a specified bonding or hazardous-area requirement, include the applicable project specification when requesting a quotation.
Dimension
