157-00253 Oval Hole Fixing Cable Tie

The YOCL ELECTRIC 157-00253 oval hole fixing cable tie combines cable bundling and tool-free panel mounting in one integrated component.

Hitam PA66HS, heat-stabilized Polyamide 6.6; −40°C to +105°C operating temperature.
Outside-serrated tie for 2.0–35.0 mm bundles, with 225 N minimum tensile strength.
Overall length 168.2 mm; width 5.1 mm.
Fits four specified oval-hole sizes and panels approximately 0.6–6.8 mm thick.
Integrated 17.63 × 23.63 mm support disc; oval fixing helps maintain routing orientation.

Tanyakan tentang produk ini

Tinjauan

The YOCL ELECTRIC 157-00253 Oval Hole Fixing Cable Tie combines an outside-serrated cable tie and a push-mount panel fixing in a single component. It secures 2.0–35.0 mm diameter bundles and mounts directly into compatible oval holes without screws, adhesive mounts or a separate fixing base.

The oval fixing geometry helps reduce unwanted rotation and maintain the cable routing direction. An integrated 17.63 × 23.63 mm support disc provides contact around the mounting point and helps stabilize the fixing against the panel. Black PA66HS construction supports an operating temperature range of −40°C to +105°C.

Fitur

Integrated push mount: combines bundling and panel fixing with tool-free installation.
Oval-hole geometry: helps maintain the fixing orientation after installation.
Support disc: covers the mounting area and provides contact against the panel surface.
Outside serrations: leave a comparatively smooth inner strap surface against the bundle.
Non-releasable plastic-pawl closure: secures the strap around the cable bundle.
Heat-stabilized PA66: specified as PA66HS, with a UL 94 V-2 flammability classification.

Spesifikasi Teknis

Parameter	Spesifikasi
Merek	YOCL ELEKTRIK
Part number	157-00253
Jenis produk	Oval hole push-mount cable tie
Konstruksi	Cable tie with integrated fixing element
Fixing method	Push mount
Mounting hole shape	Oval
Panel thickness	Approximately 0.6–6.8 mm
Bundle diameter	2.0–35.0 mm
Minimum cable tie tensile strength	225 N
Bahan	PA66HS — heat-stabilized Polyamide 6.6
Warna	Hitam
Serration	Outside serrated
Closure	Plastic pawl
Releasable	No
Suhu operasi	−40°C to +105°C
Flammability classification	UL 94 V-2
Installation	Tool-free push-in panel mounting

Dimensi

Dimensi	Value
Overall length (L)	168.2 mm
Width (W)	5.1 mm
Height (H)	12.85 mm
Support disc size	17.63 × 23.63 mm
Bundle diameter range	2.0–35.0 mm
Panel thickness range	Approximately 0.6–6.8 mm

Compatible Oval Mounting Holes

Hole shape	Dimensi
Oval	6.2 × 12.2 mm
Oval	6.5 × 12.5 mm
Oval	6.5 × 13.0 mm
Oval	7.0 × 12.0 mm

Installation Notes

Select one of the compatible oval-hole sizes listed above and a panel within the specified approximate thickness range.
Align the fixing element with the panel opening and push it into place until seated.
Wrap the tie around the wire or cable bundle and insert the strap through the locking head.
Tighten the strap around the bundle within its 2.0–35.0 mm diameter range.

The 225 N specification is the minimum tensile strength of the cable tie; it is not a panel-fixing pull-out load or installation tension.

Aplikasi

Automotive wiring harness and vehicle electrical system routing.
Vehicle interior cable mounting.
Wire harness assembly for transportation equipment.
Cable routing and panel fixing in electrical equipment.
Industrial machinery and control-system cable management.

Informasi Pemesanan

Specify 157-00253, the required quantity, the oval mounting-hole dimensions, panel thickness and cable bundle diameter when requesting a quotation. This model has a black PA66HS body, 168.2 mm overall length, an integrated support disc, and a non-releasable outside-serrated tie.