126-00123 Round-Hole Arrowhead Cable Tie with Wings
Overview
The YOCL Electric 126-00123 combines an inside-serrated cable tie, arrowhead push mount and support wings in one component. It secures a cable or wire-harness bundle directly to a panel through a compatible round mounting hole.
The fixing fits Ø6.0–6.6 mm holes in panels 0.7–3.0 mm thick. The arrowhead passes through the opening and retains behind the panel, while the support wings contact the mounting surface to help stabilize the fixing. The integrated construction keeps the tie head in a defined position.
Features
- Integrated panel fixing: One-piece construction combines bundle fastening and panel mounting.
- Support wings: Additional contact with the panel helps maintain a stable mounting point.
- Inside-serrated strap: Serrations engage the plastic locking pawl as the tie tightens around the bundle.
- Non-releasable closure: The tie remains locked after tightening.
- Push-in installation: The arrowhead mount installs by hand without a separate screw, nut or adhesive base.
- PA66HS construction: Black heat-stabilized polyamide 6.6 with an operating range of -40°C to +105°C.
Technical Specifications
Dimension
The strap accommodates bundle diameters from Ø1.5 to 45.0 mm. Match the bundle size, hole diameter and panel thickness when selecting the mounting position.
Applications
- Automotive wire harnesses and vehicle interior wiring.
- Panel-mounted cable routing in electrical equipment.
- Industrial machinery and transportation equipment.
- Wire-harness assembly and appliance wiring.
Installation Notes
- Check that the round mounting hole is Ø6.0–6.6 mm and the panel is 0.7–3.0 mm thick.
- Align the arrowhead fixing with the opening and push it through the panel.
- Confirm that the arrowhead is retained behind the panel and the support wings contact the mounting surface.
- Place the cable bundle within the Ø1.5–45.0 mm range and wrap the strap around it.
- Feed the strap through the locking head and tighten it to secure the bundle.
- Check the completed fixing and cable routing before putting the assembly into service.
The 225 N value is the minimum tensile strength of the cable tie. Panel retention and installed assembly loads require assessment for the intended application.
Ordering Information
Specify YOCL Electric 126-00123, black PA66HS, when requesting this round-hole arrowhead cable tie with support wings. Include the required quantity, bundle diameter, round-hole diameter and panel thickness so the fixing can be matched to the installation.
