156-01140 Top-Mount Edge Cable Tie, Outside Serrated

The YOCL Electric 156-01140 top-mount edge cable tie secures cables, wire harnesses, hoses and pipes directly to panel edges.

Fits 1.0–3.0 mm panels and Ø1.6–35.0 mm bundles.
150.0 × 4.6 × 1.3 mm outside-serrated strap; 225 N minimum tie tensile strength.
Integrated metal clamp for installation by hand without a mounting hole.
Pre-assembled two-piece construction with a repositionable tie head.
Black PA66HS tie and PA66HIRHS fixing; −40°C to +105°C operating range.

Consulte este produto

156-01140 Top-Mount Edge Cable Tie, Outside Serrated

Visão Geral

The YOCL Electric 156-01140 top-mount edge cable tie attaches cables, wire harnesses, hoses and pipes to 1.0–3.0 mm panel edges. Its pre-assembled two-piece construction combines a cable tie with an edge fixing that incorporates a metal retaining clamp.

The 150.0 × 4.6 × 1.3 mm strap accommodates Ø1.6–35.0 mm bundles and has a minimum tensile strength of 225 N. Outside serrations place the locking teeth on the outer strap surface, leaving a smoother inner contact surface against the bundle. The tie head can be repositioned after bundling for final harness alignment.

Características

Top-mount configuration positions the cable bundle above the panel edge.
Push-on installation by hand without a mounting hole, screw or adhesive base.
Integrated metal clamp engages the panel edge.
Outside-serrated strap with a Ø1.6–35.0 mm bundle range.
Heat-stabilized PA66HS tie and high-impact-modified, heat-stabilized PA66HIRHS fixing.
Black color, UL 94 HB material flammability classification and RoHS compliance.

Especificações Técnicas

Parâmetro	Especificação
Marca	YOCL Elétrico
Part number	156-01140
Construção	Pre-assembled, two-piece
Fixing method	Push-on edge mount
Mounting position	Top mount
Panel thickness	1.0–3.0 mm
Mounting hole required	No
Bundle diameter	Ø1.6–35.0 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized polyamide 6.6
Fixing element material	PA66HIRHS — high-impact-modified, heat-stabilized polyamide 6.6
Retaining element	Integrated metal clamp
Color	Preto
Serration	Outside serrated
Installation	Push-on by hand
Temperatura de operação	−40°C to +105°C
Material flammability	UL 94 HB
RoHS	Compliant

The 225 N value describes cable tie tensile strength. Edge-fixing retention and the load capacity of the installed assembly require separate application checks.

Dimensão

Dimensão	Value
Cable tie length (L)	150.0 mm
Cable tie width (W)	4.6 mm
Cable tie thickness / height (H)	1.3 mm
Fixing height (H2)	12.0 mm
Fixing length (L2)	15.0 mm
Fixing width (W2)	11.0 mm

Check the fixing dimensions, panel thickness and bundle diameter together when selecting the mounting position.

Aplicações

Automotive wiring and vehicle electrical harnesses.
Panel-edge routing of cables, hoses and pipes.
Wire-harness manufacturing and transportation equipment.
Industrial machinery, electrical equipment and appliance wiring.

Notas de Instalação

Check that the panel edge is 1.0–3.0 mm thick and provides clearance for the fixing.
Align the fixing with the top of the selected edge and push it into position by hand.
Check that the metal clamp has engaged the panel.
Wrap the tie around a compatible bundle and tighten it to secure the cables.
Reposition the tie head as needed, then check the fixing and bundle retention.

Informações de Encomenda

Specify part number 156-01140, the required quantity and the panel and bundle dimensions when contacting YOCL Electric about an order.