126-00225 Abraçadeira de montagem em borda de uma peça, com serrilha exterior

The YOCL ELECTRIC 126-00225 One-Piece Edge-Mount Cable Tie combines a bundling strap and integrated edge clip to secure cables and wire harnesses to compatible plastic or metal panel edges. Its outside-serrated design provides a smooth inner contact surface, while the fixing allows harness orientation adjustment after installation.

One-piece construction with an integrated push-on edge clip.
Fits approximately 1.0–3.0 mm panel edges and approximately Ø1.0–35.0 mm bundles.
Approximate minimum cable tie tensile strength: 225 N.
Black PA66HS — heat-stabilized polyamide 6.6.
Tool-free panel mounting without a drilled hole, separate screw or adhesive mounting base.

Inquire about this product

Overview

The YOCL ELECTRIC 126-00225 One-Piece Edge-Mount Cable Tie, Outside Serrated, secures cable and wire-harness bundles directly to compatible plastic or metal panel edges. The integrated edge clip and bundling strap form a single component, providing a mounting point without a drilled hole, separate screw or adhesive mounting base.

The fixing is suitable for panel edges approximately 1.0–3.0 mm thick and bundles approximately 1.0–35.0 mm in diameter. Its outside serrations leave a smooth inner contact surface around the bundle. Harness orientation can be adjusted after installation for final cable routing and alignment.

Features

One-piece construction: Combines the cable tie and edge fixing in a single component.
Push-on edge clip: Mounts directly onto compatible plastic or metal panel edges.
Outside-serrated strap: Keeps the serrations away from the cable-contact surface.
Harness orientation adjustment: Allows the harness position to be adjusted after installation.
PA66HS material: Uses black heat-stabilized polyamide 6.6.
Approximate 225 N minimum tie tensile strength: Provides the supplied approximate cable tie strength for bundle retention.

Technical Specifications

Specification	Value
Brand	YOCL ELECTRIC
Part number	126-00225
Product type	Cable tie with integrated edge fixing
Construction	One-piece
Fixing method	Push-on edge mount
Compatible panel materials	Plastic / metal
Panel thickness	Approx. 1.0–3.0 mm
Bundle diameter	Approx. Ø1.0–35.0 mm
Minimum cable tie tensile strength	Approx. 225 N
Material	PA66HS — heat-stabilized polyamide 6.6
Colour	Black
Serration	Outside serrated
Harness orientation adjustment	Yes
Mounting hole required	No
Panel installation	Push-on; no separate mounting tool required

Installation Notes

Check the panel-edge thickness and confirm compatibility with the fixing; the stated panel range is approximately 1.0–3.0 mm.
Select a mounting position with sufficient clearance for the clip, harness and adjacent components.
Align the integrated clip with the plastic or metal panel edge and push it on by hand.
Check that the clip is securely retained, then position the cable bundle within the approximate 1.0–35.0 mm range.
Wrap and tighten the tie to suit the cables and installation requirements, adjust the harness orientation if needed and check that the fixing and bundle are securely retained.

The approximately 225 N value is cable tie tensile strength. Assess panel-edge retention and installation tension separately for the application.

Aplicações

Suitable applications include automotive wire harnesses, vehicle electrical systems, truck and heavy-equipment wiring, panel-edge cable routing and industrial electrical equipment. Select the fixing according to panel-edge compatibility, bundle diameter and available installation clearance.

Ordering Information

Specify YOCL ELECTRIC 126-00225, black PA66HS, with one-piece edge fixing and an outside-serrated strap. For selection or quotation, provide the panel material, panel-edge thickness, bundle diameter and required quantity. Confirm application fit against the supplied approximate ranges.