Nickel-Plated Brass Waterproof Breathable Vent Plugs
Nickel-Plated Brass Waterproof Breathable Vent Plugs provide a threaded vent fitting for enclosure openings.
- Metric, G and NPT thread specifications with individual airflow and dimension values.
- Minimum air permeability ≥200 to ≥18000 mL/min at 70 mbar, depending on specification.
- Nickel-plated brass construction; catalog-listed IP68.
- Total length H, thread diameter, thread length GL and wrench dimension AG are listed for selection.
Обзор
Nickel-Plated Brass Waterproof Breathable Vent Plugs provide a vented fitting for threaded enclosure openings. Air permeability varies by specification and is listed as a minimum value at 70 mbar. The supplied catalog identifies brass construction with nickel plating and an IP68 protection level.
Характеристики
- Metric, G and NPT thread specifications with individual airflow and dimension values.
- Minimum airflow and mechanical dimensions are listed together for each configuration.
- Nickel-plated brass finish throughout the listed range.
Технические характеристики
| Параметр | Catalog specification |
|---|---|
| Material | Brass |
| Surface finish | Nickel plated |
| Air permeability test pressure | 70 mbar |
| Catalog-listed protection level | IP68; test depth and duration not supplied |
Models and Dimensions
All dimensions are in mm. Air permeability is in mL/min at 70 mbar. H is total length, GL is thread length, and AG is the wrench dimension.
Metric Specifications
The trailing value in each printed metric designation matches the GL dimension.
| Catalog specification | Minimum air permeability | H | Thread Ø | GL | AG |
|---|---|---|---|---|---|
| M5×0.8-5 | ≥200 | 13 | 5 | 5 | 8 |
| M5×0.8-7 | ≥300 | 15 | 5 | 7 | 10 |
| M6×1-7 | ≥300 | 15 | 6 | 7 | 10 |
| M8×1.25-7 | ≥800 | 15.5 | 8 | 7 | 12 |
| M8×1-7 | ≥800 | 15.5 | 8 | 7 | 12 |
| M10×1.5-8 | ≥1200 | 17 | 10 | 8 | 14 |
| M10×0.75-8 | ≥1200 | 17 | 10 | 8 | 14 |
| M12×1-8.5 | ≥1500 | 17.5 | 12 | 8.5 | 16 |
| M12×1.5-8.5 | ≥1500 | 17.5 | 12 | 8.5 | 16 |
| M14×1.5-10 | ≥1500 | 19 | 14 | 10 | 19 |
| M16×1.5-10 | ≥1700 | 19 | 16 | 10 | 20 |
| M18×1.5-10 | ≥1700 | 19 | 18 | 10 | 22 |
| M20×1.5-10 | ≥1700 | 19 | 20 | 10 | 22 |
| M22×1.5-10 | ≥2500 | 22 | 22 | 10 | 27 |
| M24×1.5-8 | ≥2500 | 22 | 24 | 8 | 30 |
| M25×1.5-10 | ≥2500 | 22 | 25 | 10 | 30 |
| M27×1.5-10 | ≥2500 | 22 | 27 | 10 | 32 |
| M32×1.5-15 | ≥5500 | 27 | 32 | 15 | 37 |
| M40×1.5-15 | ≥8500 | 29 | 40 | 15 | 45 |
| M50×1.5-15 | ≥15000 | 30 | 50 | 15 | 55 |
| M63×1.5-15 | ≥18000 | 30 | 63 | 15 | 68 |
G and NPT Specifications
| Catalog specification | Minimum air permeability | H | Thread Ø | GL | AG |
|---|---|---|---|---|---|
| G1/8 | ≥1200 | 17 | 9.8 | 8 | 14 |
| G1/4 | ≥1500 | 17.5 | 13.2 | 8.5 | 16 |
| G3/8 | ≥1700 | 19 | 16.8 | 10 | 22 |
| G1/2 | ≥1700 | 19 | 21 | 10 | 24 |
| G3/4 | ≥2500 | 22 | 26.5 | 10 | 30 |
| NPT1/8 | ≥1200 | 17 | 10.2 | 8 | 14 |
| NPT1/4 | ≥1500 | 17.5 | 13.7 | 8.5 | 16 |
| NPT3/8 | ≥1700 | 19 | 17.1 | 10 | 22 |
| NPT1/2 | ≥1700 | 19 | 21.3 | 10 | 24 |
| NPT3/4 | ≥2500 | 22 | 26.8 | 10 | 30 |
Руководство по выбору
Match the required thread form and pitch, minimum airflow, and installation space to the table. State the complete specification and quantity in an inquiry.
Размеры
