156-00999 Dual-Bundle Parallel Routing Cable Tie

The YOCL ELECTRIC 156-00999 dual-bundle parallel routing cable tie secures two separate cable, harness, pipe or hose bundles using a center spacing connector.

Bundle range: 2.0–47.0 mm per bundle; maximum loop diameter 50.0 mm per loop.
Up to 90° rotational movement supports routing adjustments.
Inside-serrated ties: 202.0 mm long, 4.6 mm wide, with 225 N minimum tensile strength.
Черный PA66HS ties / PA66HIRHS connector.
Pre-assembled construction with movable tie heads; no panel mounting point required.

Запрос по этому продукту

Обзор

The YOCL ELECTRIC 156-00999 Dual-Bundle Parallel Routing Cable Tie secures and separates two cable bundles, wire harnesses, pipes or hoses. Its pre-assembled, multi-part construction combines inside-serrated cable ties with a center spacing connector, creating a bundle-to-bundle routing arrangement without a panel mounting point.

Each tie accommodates a 2.0–47.0 mm bundle diameter and has a minimum tensile strength of 225 N. The connector allows up to 90° rotational movement, and the tie heads can be repositioned after bundling to adjust the routing direction. The assembly uses black PA66HS ties and a PA66HIRHS connector.

Характеристики

Two-bundle routing: secures adjacent harnesses, cables, pipes or hoses in one assembly.
Center spacing connector: maintains separation and helps reduce direct contact between the routed bundles.
Up to 90° movement: allows the bundle arrangement to adjust to changes in routing direction.
Movable tie heads: support positioning adjustments after bundling.
Inside-serrated ties: secure bundles using plastic-pawl closures.
Heat-stabilized polyamide construction: PA66HS ties with a high-impact modified PA66HIRHS connector.

Технические характеристики

Параметр	Спецификация
Бренд	YOCL ЭЛЕКТРИК
Номер детали	156-00999
Тип продукта	Dual-bundle parallel routing cable tie
Конструкция	Pre-assembled, multi-part design
Connection type	Center spacing connector
Routing type	Parallel dual-bundle routing
Number of bundles	2
Bundle diameter	2.0–47.0 mm per bundle
Maximum loop diameter — first bundle	50.0 mm
Maximum loop diameter — second bundle	50.0 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized Polyamide 6.6
Connector material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Цвет	Черный
Serration	Inside serrated
Closure	Plastic pawl
Rotational movement	Up to 90°
RoHS	Compliant

Размеры

Размеры	Value
Cable tie length (L)	202.0 mm
Cable tie width (W)	4.6 mm
Maximum strap width	4.7 mm
Bundle diameter range	2.0–47.0 mm per bundle
Maximum loop diameter — first loop	50.0 mm
Maximum loop diameter — second loop	50.0 mm

The 2.0–47.0 mm bundle range and the 50.0 mm maximum loop diameter are separate specifications. Use the stated bundle range when selecting the assembly for cable, pipe or hose diameters.

Примечания по установке

Position the first tie around the first bundle and tighten it.
Position the second tie around the adjacent bundle and tighten it.
Adjust the tie-head positions and connector movement, within the up to 90° range, to obtain the required routing direction.
Check the separation between the two routed bundles.

The 225 N specification refers to minimum cable tie tensile strength; it is not an installation tension or a combined load rating for the two-bundle assembly.

Применение

Parallel automotive wire harness routing.
Cable and hose separation in vehicle assemblies.
Adjacent pipe or hose routing.
Harness routing in transportation equipment.
Cable management in industrial machinery and electrical equipment.

Информация для заказа

Specify 156-00999, the required quantity, both bundle diameters and the required routing arrangement when requesting a quotation. This black assembly uses 202.0 mm inside-serrated cable ties and a center spacing connector with up to 90° movement.