Обзор
The YOCL ELECTRIC 156-01464 Овальное отверстие с диском для крепления стяжки secures cables and wire harnesses directly to panels. The pre-assembled two-piece design combines an inside-serrated tie with an oval fir-tree fixing and a 17.6 × 23.6 mm support disc.
The fixing accepts four oval-hole sizes and panels 0.6–5.0 mm thick. Its oval geometry helps resist unwanted rotation and maintain routing orientation. The 200.0 mm long, 4.6 mm wide tie accepts bundles up to Ø50.0 mm and has a minimum tensile strength of 225 N. The tie head can be repositioned after bundling for final harness alignment.
Характеристики
- Compatible oval holes: 6.2 × 12.2, 6.5 × 12.5, 6.5 × 13.0 and 7.0 × 12.0 mm.
- Oval fixing geometry helps maintain the intended cable-routing direction.
- 17.6 × 23.6 mm support disc contacts the panel to help stabilize the fixing point.
- Pre-assembled two-piece construction allows tie-head repositioning after bundling.
- Inside serrations engage the plastic locking pawl.
- Black PA66HS tie and PA66HIRHS fixing element; RoHS compliant.
Технические характеристики
Размеры
Installation Notes
- Choose one of the four specified oval-hole sizes and a panel 0.6–5.0 mm thick.
- Orient the fixing to suit the routing direction and push it into the panel opening.
- Confirm that the 17.6 × 23.6 mm support disc is seated against the panel.
- Wrap the tie around the bundle, tighten it through the locking head and reposition the head if needed.
- Check that the fixing and bundle are securely retained.
The fixing is also suitable for compatible threaded holes.
Применение
- Automotive wire harnesses and vehicle electrical systems.
- Panel-mounted cable routing in electrical equipment.
- Industrial machinery and control-panel wiring.
- Transportation equipment and appliance wiring.
Информация для заказа
For enquiries, specify part number 156-01464, quantity, mounting-hole size, panel thickness and bundle diameter.
