Обзор
The YOCL ELECTRIC 156-00527 Крепление стяжки к краю для панелей 3–6 mm secures cables and wire harnesses above thicker panel edges. Its pre-assembled two-piece design combines an inside-serrated cable tie with an edge fixing and an internal metal retaining clamp.
The fixing fits panel edges 3.0–6.0 mm thick without a dedicated mounting hole. The tie accepts Ø1.0–32.0 mm bundles, measures 150.0 × 3.6 × 1.1 mm and has a minimum tensile strength of 135 N. Its head can be repositioned after bundling for final routing alignment.
Характеристики
- Top-mount configuration positions the cable bundle above the panel edge.
- Edge fixing accommodates 3.0–6.0 mm thick panels.
- Integrated metal clamp grips the edge without separate mounting screws or an adhesive base.
- Inside serrations engage the locking mechanism to retain the cable bundle.
- Pre-assembled two-piece construction allows head repositioning after bundling.
- Black PA66HS cable tie and PA66HIRHS fixing element; RoHS compliant.
Технические характеристики
Размеры
Installation Notes
- Select a panel edge 3.0–6.0 mm thick and position the top-mount fixing at the required location.
- Push the fixing onto the panel edge and confirm that the integrated metal clamp is engaged.
- Wrap the tie around the cable or wire harness and tighten it through the locking head.
- Reposition the tie head if required, then check that the fixing and bundle are securely retained.
Применение
- Automotive wire harnesses and vehicle electrical systems.
- Cable routing along thicker panels and structural edges.
- Industrial machinery, electrical equipment and panel building.
- Transportation equipment and appliance wiring.
Информация для заказа
For enquiries, specify part number 156-00527, quantity, panel thickness, bundle diameter and available installation clearance.
