Conductor cross-section
Specify wire size in mm² or AWG, conductor type and the quantity for each model.
Неизолированные наконечники
Производитель
Choose bare ring, fork, pin, blade and hook terminals for your conductor termination. Match the contact dimensions and crimp barrel, and plan the insulation and clearance required by the finished assembly.
Non-Insulated Terminals series
Открыть полный каталог
DBN Non-Insulated Blade Terminals
FSNB Non-Insulated Convex Fork Terminals (TO Type)
HNB Non-Insulated Hook Terminals (TO Type)
LBN Non-Insulated Convex Blade Terminals
LSNB Non-Insulated Lock Fork Terminals
PTN Non-Insulated Pin Terminals (TZ Type)
RNB Non-Insulated Ring Terminals (TO Type)
SNB Non-Insulated Fork Terminals (TU Type)
Выберите тип соединения
| Конструкция | Фокус выбора | Ссылка на серию |
|---|---|---|
| Ring and fork terminals | Check screw diameter, tongue width and access for installation. | RNB · SNB · LSNB · FSNB |
| Pin and blade terminals | Match pin or blade dimensions and conductor range to the equipment terminal. | PTN · DBN · LBN |
| Hook terminals | Review contact geometry and the assembly’s retention requirements. | HNB |
Match the wire and the connection.
Use the selected product’s dimensional table and installation requirements to prepare your order.
Mating dimensions
Confirm stud diameter, tab width, pin size or mating connector dimensions as applicable.
Assembly method
Confirm the barrel construction, compatible die and crimping instructions for the selected terminal.
Operating conditions
Provide voltage, current, temperature and exposure requirements. Request model-specific ratings and supporting documentation.
Send your non-insulated terminals
requirements.
Send your model list, conductor sizes, connection dimensions and quantities.
Prepare an enquiryPrepare a model-by-model order.
Agree the specification and required evidence before placing your order.
Explore manufacturingModel schedule
List terminal model numbers, wire sizes, mating dimensions and quantities.
Assembly requirements
Describe the wire construction and installation method, including tooling or sample requirements.
Documentation
Identify the drawings, material declarations or test evidence required for the selected models.
OEM & PACKING
Your specification.
Your packing plan.
Build your non-insulated terminals order around the selected models, identification and supply requirements.
Model schedule
List terminal model numbers, wire sizes, mating dimensions and quantities.
Labels & identification
Provide part numbers, label artwork and any batch or traceability information required for the order.
Pack quantities
Specify quantities per model, individual packs, outer cartons and delivery destination.
Неизолированные наконечники
buying questions.
Do bare terminals need additional insulation?
The finished assembly must provide the required protection and clearances. Review covers, sleeving or enclosure arrangements against the equipment requirements; these terminals do not include an insulating sleeve.
Are the listed series interchangeable?
Not automatically. Match the complete model code, conductor range, contact geometry and assembly requirements before selecting an alternative.
What should I include in a quotation request?
Send your model list, conductor sizes, connection dimensions and quantities. Include the exact model quantities, delivery destination and required documentation.
Can you review custom labels and packaging?
Send your part numbers, label artwork, pack quantities and shipment requirements. Feasibility, sample requirements, minimum quantities and lead time are confirmed for the requested models.