MDD/MDVD Обжимные клеммы типа «папа» с изоляцией
YOCL ELECTRIC MDD/MDVD Pre-Insulated Male Terminals are brass tab connectors with PVC insulating sleeves. The combined series pairs MDD single-crimp and MDVD double-crimp models across 0.5–6 mm² conductor groups.
- Select from 14 matched pairs using NEMA tab width and thickness.
- Compare B, D, d, E, L1 and L2 dimensions by model and group.
- Group-specific maximum currents are 10 A, 15 A and 24 A as shown below.
Обзор
YOCL ELECTRIC MDD/MDVD Pre-Insulated Male Terminals are brass male tab terminals with PVC insulating sleeves. MDD is the single-crimp construction and MDVD the double-crimp construction with an additional copper tube and sleeve described in the supplied catalog. The page lists 14 matched model pairs in conductor groups from 0.5 to 6 mm².
Характеристики
- Male tab connection: NEMA tab dimensions are specified by model for mating-part selection.
- Two crimp constructions: MDD and MDVD share tab and body dimensions by paired row, while overall length differs between L1 and L2.
- Brass and PVC construction: brass terminal material and PVC insulation are stated for all three conductor groups.
- Group-specific specifications: conductor range, Imax and the shared E, D and d dimensions are listed by group.
Технические характеристики
| Параметр | Спецификация |
|---|---|
| Тип продукта | Pre-insulated male terminal |
| Серия | MDD single crimp; MDVD double crimp |
| Listed models | 14 MDD and 14 MDVD |
| Terminal material | Brass |
| Insulation | PVC |
| MDVD construction | Copper tube with sleeve, described as double pressure in the source |
| Drawing dimension units | mm |
Imax is the source’s maximum-current label. Each figure belongs to its conductor group; no test or installation conditions are given.
| Model group | Color | Conductor range | AWG | Imax | E (mm) | D (mm) | d (mm) |
|---|---|---|---|---|---|---|---|
| MDD/MDVD 1.25 | Red | 0.5–1.5 mm² | AWG 22–16 | 10 A | 10.0 | 1.7 | 3.8 |
| MDD/MDVD 2 | Blue | 1.5–2.5 mm² | AWG 16–14 | 15 A | 10.0 | 2.3 | 4.3 |
| MDD/MDVD 5.5 | Yellow | 4–6 mm² | AWG 12–10 | 24 A | 12.5 | 3.4 | 5.7 |
Размеры
The NEMA tab column gives thickness × width. The separate material-thickness column repeats the tab thickness for each row. L1 is the MDD single-crimp overall length; L2 is the MDVD double-crimp overall length. All values are in millimeters.
| MDD single-crimp model | MDVD double-crimp model | Color | NEMA tab (mm) | Material thickness (mm) | B (mm) | L1, MDD (mm) | L2, MDVD (mm) |
|---|---|---|---|---|---|---|---|
| MDD 1.25-110(5) | MDVD 1.25-110(5) | Red | 0.5 × 2.8 | 0.5 | 2.8 | 17.7 | 18.2 |
| MDD 1.25-110(8) | MDVD 1.25-110(8) | Red | 0.8 × 2.8 | 0.8 | 2.8 | 17.7 | 18.2 |
| MDD 1.25-187(5) | MDVD 1.25-187(5) | Red | 0.5 × 4.75 | 0.5 | 4.75 | 20.0 | 20.5 |
| MDD 1.25-187(8) | MDVD 1.25-187(8) | Red | 0.8 × 4.75 | 0.8 | 4.75 | 20.0 | 20.5 |
| MDD 1.25-250 | MDVD 1.25-250 | Red | 0.8 × 6.35 | 0.8 | 6.35 | 21.0 | 21.5 |
| MDD 2-110(5) | MDVD 2-110(5) | Blue | 0.5 × 2.8 | 0.5 | 2.8 | 17.7 | 18.2 |
| MDD 2-110(8) | MDVD 2-110(8) | Blue | 0.8 × 2.8 | 0.8 | 2.8 | 17.7 | 18.2 |
| MDD 2-187(5) | MDVD 2-187(5) | Blue | 0.5 × 4.75 | 0.5 | 4.75 | 20.0 | 20.5 |
| MDD 2-187(8) | MDVD 2-187(8) | Blue | 0.8 × 4.75 | 0.8 | 4.75 | 20.0 | 20.5 |
| MDD 2-250 | MDVD 2-250 | Blue | 0.8 × 6.35 | 0.8 | 6.35 | 21.0 | 21.5 |
| MDD 5.5-110(5) | MDVD 5.5-110(5) | Yellow | 0.5 × 2.8 | 0.5 | 2.8 | 20.0 | 20.5 |
| MDD 5.5-110(8) | MDVD 5.5-110(8) | Yellow | 0.8 × 2.8 | 0.8 | 2.8 | 20.0 | 20.5 |
| MDD 5.5-187 | MDVD 5.5-187 | Yellow | 0.5 × 4.75 | 0.5 | 4.75 | 22.0 | 22.5 |
| MDD 5.5-250 | MDVD 5.5-250 | Yellow | 0.8 × 6.35 | 0.8 | 6.35 | 23.0 | 23.5 |
E, D and d for each row are shown by model group in the technical specification table above.
Руководство по выбору
Choose the MDD or MDVD construction and conductor group first. Then match NEMA tab width and thickness to the mating connector. Check B, E, D, d and the relevant L1 or L2 length against the available connection space. Specify the exact model code when ordering.
Информация для заказа
Provide the MDD or MDVD model and quantity when requesting a quotation.