GT-EHD Extra Heavy Duty Cable Ties

GT-EHD Extra Heavy Duty Cable Ties secure bundles where higher loop tensile strength is required. The series uses one-piece PA66 construction and offers four lengths, all with a 12.6 mm width and a minimum loop tensile strength of 113.4 kgf (250 lb).

Material: Polyamide 6.6 (PA66).
Operating temperature: −40 to +85 °C.
Colours: Colours available on request.
4 models with model-specific dimensions and minimum loop tensile strength.

Bu ürün hakkında bilgi alın

Genel Bakış

Özellikler

One-piece construction for bundle retention.
12.6 mm tie width across all four models.
Minimum loop tensile strength of 113.4 kgf (250 lb).
Maximum bundle diameters from 76 to 204 mm.

Teknik Özellikler

Parametre	Teknik Özellikler
Malzeme	Polyamide 6.6 (PA66)
Belirtilen malzeme yanıcılık sınıflandırması	UL 94 V-2
Çalışma sıcaklığı	−40 ila +85 °C
Renkler	Colours available on request
Modeller	4

Boyut

Dimensions are in millimetres. Minimum loop tensile strength is given in kgf and pounds-force; it is not a working-load rating. Actual lengths follow the specification table rather than the nominal number in the part code.

Part number	Uzunluk (mm)	Genişlik (mm)	Maks. kablo demeti çapı (mm)	Min. loop tensile strength (kgf)	Min. loop tensile strength (lb)
GT-290EHD	295	12.6	76	113.4	250
GT-480EHD	480	12.6	120	113.4	250
GT-580EHD	580	12.6	152	113.4	250
GT-730EHD	730	12.6	204	113.4	250

Seçim Kılavuzu

Select by bundle diameter, available tie length, width and minimum loop tensile strength. Check the stated operating temperature against the installation environment.

Sipariş Bilgileri

Provide the complete part number, colour and quantity when requesting a quotation.