YOCL

HSS Two Piece Edge Fixing Cable Ties

Pre-assembled cable tie and edge-clip assemblies for top fixing on panel edges from1 to3 mm.

  • No mounting hole or adhesive required.
  • Tie head can move after bundling.
  • EC9 and EC10 described for bundles from1 mm diameter.
Bu ürün hakkında bilgi alın

Genel Bakış

Pre-assembled cable tie and edge-clip assemblies for top fixing on panel edges from1 to3 mm.

Özellikler

  • No mounting hole or adhesive required.
  • Tie head can move after bundling.
  • EC9 and EC10 described for bundles from1 mm diameter.

Teknik Özellikler

Parametre Teknik Özellikler
Listelenen konfigürasyonlar 17
Panel edge thickness 1–3 mm

Boyut

HSS Two Piece Edge Fixing Cable Ties dimension drawing

Aksi belirtilmedikçe boyutlar milimetre cinsindendir. Minimum halka mukavemeti Newton cinsinden verilmiştir ve montaj çekme veya çalışma yükü derecesi değildir. Farklı özelliklere sahip tekrarlanan model kodları, ayrı listelenen yapılandırmalardır.

Model Genişlik (mm) Uzunluk (mm) Maks. kablo demeti çapı (mm) Min. loop strength (N) Tie material Foot material Renk
HSS-36148EC4A 3.6 148 33 135 PA66HS PA66HIRHS Siyah
HSS-46150EC4A 4.6 150 35 225 PA66HS PA66HIRHS Siyah
HSS-46200EC4A 4.6 200 45 225 PA66HS PA66HIRHS Siyah
HSS-46200EC4AW 4.6 200 45 225 PA66W PA66W Siyah
HSS-46202EC4A 4.6 202 45 225 PA66HS PA66HIRHS Siyah
HSS-36148EC4B 3.6 148 35 135 PA66HS PA66HIRHS Siyah
HSS-46150EC4B 4.6 150 35 225 PA66HS PA66HIRHS Siyah
HSS-46200EC4B 4.6 200 45 225 PA66HS PA66HIRHS Siyah
HSS-25100EC10SD 2.5 100 22 80 PA66HS PA66HIRHS Siyah
HSS-46150EC10 4.6 150 31 225 PA66HS PA66HIRHS Siyah
HSS-46200EC10 4.6 200 45 225 PA66HS PA66HIRHS Siyah
HSS-25100EC9SD 2.5 100 22 80 PA66HS PA66HIRHS Siyah
HSS-46150EC9SD 4.6 150 31 225 PA66HS PA66HIRHS Siyah
HSS-46200EC9 4.6 200 45 225 PA66HS PA66HIRHS Siyah
HSS-46200EC9SD 4.6 200 45 225 PA66HS PA66HIRHS Siyah
HSS-47210EC4A 4.7 210 45 220 PA66W PA66W Siyah
HSS-47210EC4B 4.7 210 45 220 PA66W PA66W Siyah

Seçim Kılavuzu

Choose the fixing structure for the mounting surface, then check bundle capacity, hole or stud diameter, panel thickness and material where listed. Do not substitute minimum loop strength for mounting retention strength.

Sipariş Bilgileri

Provide the complete model and applicable dimensions, material and colour when requesting a quotation.

Proje detayları

* ile işaretlenmiş alanlar zorunludur.

Sorunuza yanıt vermek için bilgileriniz kullanılacaktır. Gizlilik bildirimi