HSMS-GF 3:1 & 4:1 Military-Standard Flame-Retardant Dual-Wall Heat Shrink Tubing
YOCL ELECTRIC HSMS-GF flame-retardant dual-wall heat shrink tubing combines polyolefin insulation with hot-melt adhesive sealing for wire harnesses, marine cables and electrical joints.
- 3:1 and 4:1 versions, with 21 size options across the two ranges.
- Product specification references AMS-DTL-23053/4.
- Operating temperature: -45°C to +135°C.
- Initial shrink: ≥70°C; full shrink: ≥125°C.
- Elongation at break: ≥300%; tensile strength: ≥10.4 MPa.
- UV resistant and RoHS compliant; standard color: Black.
Genel Bakış
YOCL ELECTRIC HSMS-GF flame-retardant heat shrink tubing provides electrical insulation, environmental sealing and mechanical protection for wire harnesses, marine cables, electrical connections and metal components. Its dual-wall construction combines a flame-retardant polyolefin outer layer with hot-melt adhesive lining.
During heating, the outer layer shrinks while the adhesive softens and flows around the underlying cable, joint or component. After cooling, the adhesive helps form a sealed interface against water, moisture and corrosion.
The series offers 3:1 and 4:1 shrink ratios, with 12 sizes in the 3:1 range and nine sizes in the 4:1 range. The product specification references AMS-DTL-23053/4, and the operating range is -45°C to +135°C.
Özellikler
- Flame-retardant outer layer: Polyolefin provides insulation and mechanical protection with a stated flame-retardancy test result of Pass.
- Two recovery ranges: Select 3:1 or 4:1 according to the installation diameter and final cable or component diameter.
- Adhesive sealing: The hot-melt lining helps protect joints against water, moisture and corrosion.
- Mechanical performance: Tensile strength ≥10.4 MPa and elongation at break ≥300%.
- Reference standard: AMS-DTL-23053/4 is listed in the product specification.
- UV and color options: UV resistance is specified; Black is standard, with 10 standard colors available.
Teknik Özellikler
| Parametre | Teknik Özellikler |
|---|---|
| Marka | YOCL ELEKTRİK |
| Seri | HSMS-GF |
| Ürün tipi | Dual-wall adhesive-lined heat shrink tubing |
| Shrink ratios | 3:1 / 4:1 |
| Reference standard | AMS-DTL-23053/4 |
| Outer layer | Flame-retardant polyolefin |
| Inner layer | Hot-melt adhesive |
| 3:1 supplied I.D. size range | 3.2–50.0 mm; 12 sizes |
| 4:1 supplied I.D. size range | 4.0–52.0 mm; 9 sizes |
| Initial shrink temperature | ≥70°C |
| Full shrink temperature | ≥125°C |
| Çalışma sıcaklığı | -45°C to +135°C |
| UV resistance | Yes |
| Environmental standard | RoHS |
| Standard color | Siyah |
| Color availability | 10 standard colors available |
The reference standard identifies the specification cited for this series. Initial and full shrink temperatures describe recovery during installation; the operating range describes service conditions.
Outer-Layer Performance
| Property | Teknik Özellikler | Supplied test method or condition |
|---|---|---|
| Tensile strength | ≥10.4 MPa | ASTM D2671 |
| Elongation at break | ≥300% | ASTM D2671 |
| Tensile strength after aging | ≥8.4 MPa | 175°C × 168 h |
| Elongation after aging | ≥100% | 175°C × 168 h |
| Axial change | -8% to +8% | ASTM D2671 |
| Flame retardancy | Pass | ASTM D2671 |
| Thermal shock | No cracks / No dripping | ASTM D2671; 250°C × 4 h |
| Cold bending | No cracks | ASTM D2671; -45°C × 4 h |
| Water absorption | <0.5% | ASTM D570 |
| Breakdown strength | ≥15 kV/mm | IEC 60243 |
| Volume resistivity | ≥10¹⁴ Ω·cm | IEC 60093 |
Heat aging, thermal shock and cold bending temperatures are test conditions. The specified operating range remains -45°C to +135°C.
Hot-Melt Adhesive Performance
| Property | Teknik Özellikler | Supplied test method |
|---|---|---|
| Softening point | 90 ± 5°C | ASTM E28 |
| Water absorption | <0.5% | ASTM D570 |
| Peel strength to PE | 120 N/25 mm | ASTM D1000 |
| Peel strength to Al | 80 N/25 mm | ASTM D1000 |
The peel-strength values are listed for polyethylene (PE) and aluminum (Al) substrates respectively.
Boyut
HSMS-GF 3:1 Sizes
| Size | Supplied I.D. | Max. I.D. After Recovery | Total Wall Thickness | Adhesive Layer Thickness | Standard Packaging |
|---|---|---|---|---|---|
| 3.2 mm | ≥3.2 mm | ≤1.00 mm | 0.90 ± 0.30 mm | 0.40 ± 0.20 mm | 200 m |
| 4.8 mm | ≥4.8 mm | ≤1.60 mm | 1.05 ± 0.30 mm | 0.40 ± 0.20 mm | 100 m |
| 6.4 mm | ≥6.4 mm | ≤2.20 mm | 1.25 ± 0.30 mm | 0.45 ± 0.20 mm | 100 m |
| 7.9 mm | ≥7.9 mm | ≤2.70 mm | 1.35 ± 0.30 mm | 0.45 ± 0.20 mm | 100 m |
| 9.5 mm | ≥9.5 mm | ≤3.20 mm | 1.45 ± 0.30 mm | 0.50 ± 0.20 mm | 50 m |
| 12.7 mm | ≥12.7 mm | ≤4.20 mm | 1.65 ± 0.30 mm | 0.50 ± 0.20 mm | 1.22 m |
| 15.0 mm | ≥15.0 mm | ≤5.20 mm | 1.80 ± 0.30 mm | 0.55 ± 0.30 mm | 1.22 m |
| 19.1 mm | ≥19.1 mm | ≤6.30 mm | 1.95 ± 0.30 mm | 0.60 ± 0.30 mm | 1.22 m |
| 25.4 mm | ≥25.4 mm | ≤8.50 mm | 2.00 ± 0.40 mm | 0.60 ± 0.30 mm | 1.22 m |
| 30.0 mm | ≥30.0 mm | ≤10.20 mm | 2.15 ± 0.40 mm | 0.65 ± 0.30 mm | 1.22 m |
| 39.0 mm | ≥39.0 mm | ≤13.50 mm | 2.45 ± 0.40 mm | 0.75 ± 0.30 mm | 1.22 m |
| 50.0 mm | ≥50.0 mm | ≤17.00 mm | 2.75 ± 0.40 mm | 0.80 ± 0.30 mm | 1.22 m |
HSMS-GF 4:1 Sizes
| Size | Supplied I.D. | Max. I.D. After Recovery | Total Wall Thickness | Adhesive Layer Thickness | Standard Packaging |
|---|---|---|---|---|---|
| 4.0 mm | ≥4.0 mm | ≤1.0 mm | 1.05 ± 0.30 mm | 0.50 ± 0.20 mm | 200 m |
| 6.0 mm | ≥6.0 mm | ≤1.5 mm | 1.15 ± 0.30 mm | 0.50 ± 0.20 mm | 100 m |
| 8.0 mm | ≥8.0 mm | ≤2.0 mm | 1.15 ± 0.30 mm | 0.60 ± 0.25 mm | 100 m |
| 12.0 mm | ≥12.0 mm | ≤3.0 mm | 1.75 ± 0.30 mm | 0.60 ± 0.25 mm | 1.22 m |
| 16.0 mm | ≥16.0 mm | ≤4.0 mm | 2.00 ± 0.35 mm | 0.70 ± 0.30 mm | 1.22 m |
| 20.0 mm | ≥20.0 mm | ≤5.0 mm | 2.30 ± 0.40 mm | 0.70 ± 0.30 mm | 1.22 m |
| 24.0 mm | ≥24.0 mm | ≤6.0 mm | 2.60 ± 0.40 mm | 0.75 ± 0.30 mm | 1.22 m |
| 32.0 mm | ≥32.0 mm | ≤8.0 mm | 3.00 ± 0.50 mm | 0.90 ± 0.30 mm | 1.22 m |
| 52.0 mm | ≥52.0 mm | ≤13.0 mm | 3.35 ± 0.50 mm | 0.95 ± 0.30 mm | 1.22 m |
The tables retain the supplied and recovered internal-diameter limits, thickness tolerances and standard packaging for each version. Select from the individual values rather than calculating recovery limits from the shrink ratio alone.
Seçim Kılavuzu
Choose a supplied I.D. that passes over the largest terminal, connector or component, then check the maximum recovered I.D. against the smaller cable or surface requiring sealing. Use the 3:1 range for general cable and component sealing; use the 4:1 range where larger diameter transitions are required.
Check the total wall and adhesive-layer thicknesses against the available space and the required sealed interface. For example, the 4:1 16.0 mm size has supplied I.D. ≥16.0 mm, maximum recovered I.D. ≤4.0 mm, total wall thickness 2.00 ± 0.35 mm and adhesive-layer thickness 0.70 ± 0.30 mm.
Uygulamalar
- Wire-harness insulation, bundling and sealing.
- Marine wire and cable connections.
- Electrical cable joints, connectors, terminals and splices.
- Metal tubing and components requiring moisture and corrosion protection.
- Electrical installations requiring flame-retardant insulation and adhesive sealing.
Sipariş Bilgileri
Specify HSMS-GF, the 3:1 or 4:1 version, supplied I.D. size, color and required quantity when requesting a quotation from YOCL ELECTRIC. Black is the standard color. The specification lists 10 standard colors without identifying their individual names. Refer to the size tables for standard packaging lengths of 200 m, 100 m, 50 m or 1.22 m, depending on the version and size.