HXT Solder Seal Wire Splices
YOCL ELECTRIC HXT Solder Seal Wire Splices combine a transparent heat-shrink sleeve, a solder ring and hot-melt adhesive at both ends for inline wire connections. Four color-coded models cover the listed conductor sections from 0.25 to 6.0 mm².
- 2:1 shrink ratio and transparent sleeve for visual inspection.
- Operating temperature range: −55 to +125 °C.
- Select by wire section and the listed A, L, B and C dimensions.
Overview
YOCL ELECTRIC HXT Solder Seal Wire Splices combine a transparent heat-shrink sleeve, an internal solder ring and hot-melt adhesive at both ends. The four color-coded models support inline connections over the listed conductor-section ranges.
Features
- Integrated construction: sleeve, solder ring and adhesive ends in one component.
- Transparent sleeve: allows visual inspection of the connection area.
- Adhesive-sealed ends: designed to seal the splice after heat recovery.
- Color-coded sizes: white, red, blue and yellow models correspond to different wire sections.
Technical Specifications
| Parameter | Specification |
|---|---|
| Series | HXT |
| Product type | Heat-shrink solder seal wire splice |
| Shrink ratio | 2:1 |
| Operating temperature | −55 to +125 °C |
| Initial shrink temperature | 80 °C |
| Solder melting begins | 138 °C |
| Minimum full recovery temperature | 160 °C |
| Ingress protection stated for completed splice | IP67 |
| Available models | HXT-11, HXT-21, HXT-31, HXT-41 |
Dimension
All product dimensions are in millimeters. A and L describe the sleeve. B and C are the wire dimensions labeled in the source drawing; minimum values are reproduced as listed.
| Model | AWG | Lead section (mm²) | A min. | L min. | B min. | B and C min. | C min. | Standard color |
|---|---|---|---|---|---|---|---|---|
| HXT-11 | 26–24 | 0.25–0.34 | 1.7 | 26 | 1.0 | 1.7 | 0.75 | White |
| HXT-21 | 22–18 | 0.5–1.0 | 2.7 | 40 | 1.4 | 2.7 | 1.2 | Red |
| HXT-31 | 16–14 | 1.5–2.5 | 4.5 | 40 | 2.3 | 4.5 | 2.0 | Blue |
| HXT-41 | 12–10 | 4.0–6.0 | 6.0 | 40 | 3.7 | 6.0 | 3.4 | Yellow |
Selection Guide
Match the conductor section to the model row, then check the specified sleeve and wire dimensions. Choose the color corresponding to that model.
Ordering Information
Provide the full HXT model and quantity when requesting a quotation.