Plastic Waterproof Breathable Vent Plugs
Plastic waterproof breathable vent plugs for enclosure openings, listed in PA66 with black, gray and white color options.
- Metric thread sizes in the catalogue range from M5×0.8 to M42×1.5.
- Air permeability is specified by model at a 70 mbar test pressure.
- The catalogue lists IP67 protection for every row.
- Compare the thread, airflow, total length and wrench size in the model table before ordering.
Genel Bakış
These plastic waterproof breathable vent plugs provide a vented fitting for an enclosure opening. The supplied catalogue lists PA66 construction, black, gray and white color options, and an IP67 protection level. Air permeability varies by size and is specified at a test pressure of 70 mbar.
Özellikler
- Metric threaded sizes from M5×0.8 through M42×1.5 in the supplied table.
- Model-specific minimum air permeability values, all referenced to 70 mbar.
- Total length H, thread length GL and wrench diameter AG are provided for size selection.
- Black, gray and white are listed colors; confirm the required color when ordering.
Teknik Özellikler
| Parameter | Catalogue specification |
|---|---|
| Product type | Plastic waterproof breathable vent plug |
| Material | PA66 |
| Listed colors | Black, gray, white |
| Air permeability test pressure | 70 mbar |
| Protection level | IP67 (catalogue value) |
Models and Dimensions
All dimensions are in mm. Air permeability values below are minimum values from the supplied table at 70 mbar. H is total length, GL is thread length, and AG is wrench diameter. The catalogue prints two M12×1.5-10 records with different airflow and dimensions. Both are retained as supplied; the row labels distinguish their specifications and are not manufacturer order codes.
| Catalogue specification | Minimum air permeability (ml/min @ 70 mbar) | H | Thread Ø | GL | AG |
|---|---|---|---|---|---|
| M5×0.8-7 | ≥600 | 13 | 5 | 7 | 12 |
| M6×1-7 | ≥600 | 13 | 6 | 7 | 12 |
| M8×1.25-10 | ≥1200 | 18 | 8 | 10 | 17 |
| M8×1-7 | ≥600 | 12.5 | 8 | 7 | 12 |
| M10×1.5-10 | ≥1500 | 18 | 10 | 10 | 17 |
| M12×1.5-10 (source row 6) | ≥1500 | 18 | 12 | 10 | 17 |
| M12×1.5-10 (source row 7) | ≥1200 | 16 | 12 | 10 | 16 |
| M12×1-10 | ≥1200 | 16 | 12 | 10 | 16 |
| M16×1.5-10 | ≥4500 | 18 | 16 | 10 | 22 |
| M18×1.5-10 | ≥4500 | 18 | 18 | 10 | 24 |
| M20×1.5-10 | ≥4500 | 18 | 20 | 10 | 27 |
| M24×1.5-15 | ≥7000 | 25 | 24 | 15 | 36 |
| M32×1.5-15 | ≥8000 | 25 | 32 | 15 | 45 |
| M40×1.5-15 | ≥8500 | 25 | 40 | 15 | 56 |
| M42×1.5-15 | ≥8500 | 25 | 42 | 15 | 56 |
Seçim Kılavuzu
Match the enclosure thread, required airflow and available installation space to the table. State the needed color and exact specification in an enquiry. For M12×1.5-10, specify the airflow, H and AG values as well as the printed designation so the two listed configurations can be distinguished.
Boyut
