أربطة كابلات مقاومة للحرارة GT 150°C

GT 150°C heat resistant cable ties secure cable and pipe bundles with an internally serrated locking design. The series uses Polyamide 6.6 and is listed in natural and black colours.

Operating temperature: −40 to +150 °C.
45 models with lengths from 80 to 1530 mm and widths from 2.4 to 9 mm.
Model-specific minimum loop tensile strength from 8.2 to 79.3 kgf (18–175 lb).
Maximum bundle diameter depends on the selected model.

استفسر عن هذا المنتج

نظرة عامة

GT 150°C Heat Resistant Cable Ties are PA66 ties for securing cable and pipe bundles. Internal serrations engage the locking head to hold the bundle, while the head design is intended to support firm retention with low insertion force.

The series has an operating temperature range of −40 to +150 °C and includes 45 models. Natural and black are the listed colours. Select the model by length, width, maximum bundle diameter and minimum loop tensile strength.

الميزات

Polyamide 6.6 construction for the specified heat-resistant series.
Internal serrations and a locking head for bundle retention.
Operating temperature up to 150 °C.
Natural and black colour options.
Model-specific bundle capacity and minimum loop tensile strength.

المواصفات الفنية

المعلمة	المواصفات
السلسلة	GT, 150 °C type
المادة	Polyamide 6.6 (PA66)
تصنيف قابلية اشتعال المادة المذكور	UL 94 V-2
درجة حرارة التشغيل	−40 to +150 °C
Colours	Natural; black
Length range	80–1530 mm, model-specific
Width range	2.4–9 mm, model-specific
Minimum loop tensile strength	8.2–79.3 kgf (18–175 lb), model-specific

الأبعاد

Lengths, widths and maximum bundle diameters are in millimetres. Minimum loop tensile strength is given in kgf and pounds-force, as in the supplied table; it is not a working-load rating. Actual dimensions follow the table even where the model’s nominal number differs.

Part number	Length	Width	Max. bundle diameter	Min. loop strength (kgf)	Min. loop strength (lb)
GT-80MH150	80	2.4	15	8.2	18
GT-100MH150	100	2.5	22	8.2	18
GT-120MH150	120	2.5	30	8.2	18
GT-140MH150	140	2.5	33	8.2	18
GT-160MH150	160	2.5	40	8.2	18
GT-200MH150	200	2.5	53	8.2	18
GT-250MH150	250	2.8	65	14	31
GT-300MH150	300	2.8	76	14	31
GT-120IH150	120	3.6	30	18.2	40
GT-140IH150	140	3.6	33	18.2	40
GT-150IH150	150	3.6	35	18.2	40
GT-180IH150	180	3.6	44	18.2	40
GT-200IH150	200	3.6	53	18.2	40
GT-250IH150	250	3.6	65	18.2	40
GT-300IH150	300	3.6	76	18.2	40
GT-370IH150	370	3.6	102	18.2	40
GT-120STH150	120	4.8	24	22.6	50
GT-160STH150	160	4.8	38	22.6	50
GT-190STH150	190	4.8	46	22.6	50
GT-200STH150	200	4.8	50	22.6	50
GT-250STH150	250	4.8	60	22.6	50
GT-280STH150	280	4.8	70	22.6	50
GT-300STH150	300	4.8	76	22.6	50
GT-370STH150	370	4.8	102	22.6	50
GT-390STH150	390	4.8	105	22.6	50
GT-430STH150	430	4.8	110	22.6	50
GT-450STH150	450	4.8	116	22.6	50
GT-530STH150	530	4.8	140	22.6	50
GT-150HDH150	150	7.6	33	54.5	120
GT-200HDH150	200	7.6	50	54.5	120
GT-250HDH150	250	7.6	65	54.5	120
GT-300HDH150	300	7.6	76	54.5	120
GT-370HDH150	370	7.6	102	54.5	120
GT-430HD-SH150	430	7.6	125	54.5	120
GT-450HD-SH150	450	7.6	132	54.5	120
GT-540HD-SH150	533	7.6	140	54.5	120
GT-430HDH150	430	9	120	79.3	175
GT-530HDH150	530	9	140	79.3	175
GT-630HDH150	609	9	178	79.3	175
GT-710HDH150	710	9	190	79.3	175
GT-780HDH150	778	9	228	79.3	175
GT-830HDH150	815	9	239	79.3	175
GT-920HDH150	916	9	263	79.3	175
GT-1220HDH150	1220	9	365	79.3	175
GT-1530HDH150	1530	9	460	79.3	175

دليل الاختيار

Choose a maximum bundle diameter that accommodates the intended bundle, then check tie width, available length and the required minimum loop tensile strength. Use the stated operating-temperature range when selecting the heat-resistant grade. Natural and black colour choices do not establish a UV-weathering rating.

معلومات الطلب

Provide the complete GT part number, colour and quantity when requesting a quotation.