JT Ladder Self-Locking Stainless Steel Cable Ties
JT ladder self-locking stainless steel cable ties with multiple-hook locking, available as uncoated JT or coated JTP versions.
- Listed stainless steel grades: 201, 304 and 316.
- Widths: 7 mm and 12 mm; listed lengths: 150–700 mm.
- Minimum tensile strength: 667 N for 7 mm; 1,000 N for 12 mm.
- Listed thickness options: 0.25 mm and 0.30 mm.
- Recommended tools: CT02 and HT-338.
Overview
The YOCL ELECTRIC JT Ladder Self-Locking Stainless Steel Cable Ties use a ladder-style band with multiple-hook locking. The supplied dimension table covers uncoated JT and coated JTP versions in 7 mm and 12 mm widths.
The locking system avoids additional rolling and folding of the band. An enlarged slot at the tail supports use with a hook-type installation tool. Listed stainless steel grades are 201, 304 and 316.
Features
- Self-locking ladder band: Multiple-hook construction for securing bundles.
- Tool access: Enlarged tail slot for a hook-type tool.
- Finish choices: Uncoated metal and coated versions.
- Width-specific strength: 667 N minimum tensile strength at 7 mm width and 1,000 N at 12 mm width.
- Coated band protection: A coating provides an additional barrier at band edges and between the metal band and bundled materials.
Technical Specifications
| Parameter | Specification |
|---|---|
| Dimensioned series | JT uncoated; JTP coated |
| Locking construction | Ladder-style band, multiple hooks |
| Stainless steel grades listed | 201; 304; 316 |
| Width options | 7 mm; 12 mm |
| Thickness options listed | 0.25 mm; 0.30 mm |
| Lengths listed | 150; 225; 300; 400; 450; 550; 600; 700 mm |
| Minimum tensile strength, 7 mm width | 667 N / 150 lbf |
| Minimum tensile strength, 12 mm width | 1,000 N / 225 lbf |
| Coating materials listed in the source | Polyester; epoxy; nylon 11 |
| Recommended installation tools | CT02; HT-338 |
The source does not assign individual coating materials, steel grades or thicknesses to specific order codes. Select these details for the required supplied configuration.
Dimension
The table uses the source’s explicit length column. Some printed item numbers contain a different length suffix, so they are not used as order codes here. Inch values are rounded conversions from millimetres.
| Width W (mm) | Length L (mm) | Width (inch) | Length (inch) | Minimum tensile strength (N) | Minimum tensile strength (lbf) |
|---|---|---|---|---|---|
| 7 | 150 | 0.28 | 5.9 | 667 | 150 |
| 7 | 225 | 0.28 | 8.9 | 667 | 150 |
| 7 | 300 | 0.28 | 11.8 | 667 | 150 |
| 7 | 400 | 0.28 | 15.7 | 667 | 150 |
| 7 | 450 | 0.28 | 17.7 | 667 | 150 |
| 7 | 550 | 0.28 | 21.7 | 667 | 150 |
| 7 | 600 | 0.28 | 23.6 | 667 | 150 |
| 7 | 700 | 0.28 | 27.6 | 667 | 150 |
| 12 | 150 | 0.47 | 5.9 | 1,000 | 225 |
| 12 | 225 | 0.47 | 8.9 | 1,000 | 225 |
| 12 | 300 | 0.47 | 11.8 | 1,000 | 225 |
| 12 | 400 | 0.47 | 15.7 | 1,000 | 225 |
| 12 | 450 | 0.47 | 17.7 | 1,000 | 225 |
| 12 | 550 | 0.47 | 21.7 | 1,000 | 225 |
| 12 | 600 | 0.47 | 23.6 | 1,000 | 225 |
| 12 | 700 | 0.47 | 27.6 | 1,000 | 225 |
Listed band thicknesses are 0.25 mm (approximately 0.010 inch) and 0.30 mm (approximately 0.012 inch). Overall bundle diameter D is illustrated but no numerical range is supplied.
Related Single-Hook Series
The supplied page also identifies JTE and JTEP as single-hook versions. It does not provide a separate dimension or tensile-strength table for those series; the JT/JTP values above are not assigned to them.
Temperature and Finish Selection
The source gives −80 °C to +538 °C under the multiple-hook JT/JTP heading and −80 °C to +150 °C under the single-hook JTE/JTEP heading. It does not separate the temperature rating of each bare-metal or coated configuration. A +538 °C rating is therefore not assigned to every coated version in this product data.
Specify the required working temperature and coating when selecting the supplied configuration.
Ordering Information
Specify JT or JTP, band width, actual length, thickness, stainless steel grade and required finish. For coated versions, specify the coating material and working temperature. Select CT02 or HT-338 tooling as appropriate for the supplied band configuration.