HSS Edge Fixing Cable Ties
Cable ties with an integrated edge clamp for panel edges where drilling or adhesive fixing is unsuitable.
- Hand assembly.
- Integrated metal spring clamp.
- Panel thickness selected by model.
Overview
Cable ties with an integrated edge clamp for panel edges where drilling or adhesive fixing is unsuitable.
Features
- Hand assembly.
- Integrated metal spring clamp.
- Panel thickness selected by model.
Technical Specifications
| Parameter | Specification |
|---|---|
| Listed configurations | 5 |
Dimension
Dimensions are in millimetres unless stated otherwise. Minimum loop strength is given in newtons and is not a mounting pull-out or working-load rating. Repeated model codes with different specifications are distinct listed configurations.
| Model | Drawing configuration | Width (mm) | Length (mm) | Max. bundle diameter (mm) | Min. loop strength (N) | Panel thickness (mm) | Material | Colour |
|---|---|---|---|---|---|---|---|---|
| HSS-46160PA | Source row1 | 4.6 | 160 | 35 | 180 | 1–3 | PA66HS | Black |
| HSS-46160IPA | Source row2 | 4.6 | 160 | 35 | 180 | 1–3 | PA66HS | Black |
| HSS-4085PA | Source row3 | 4 | 85 | 15 | 178 | 1–3 | PA66HS | Black |
| HSS-46155PA | Source row4 | 4.6 | 155 | 35 | 180 | 1–3 | PA66HS | Black |
| HSS-46161PA | Source row5 | 4.6 | 161 | 35 | 180 | 3–6 | PA66HS | Black |
Selection Guide
Choose the fixing structure for the mounting surface, then check bundle capacity, hole or stud diameter, panel thickness and material where listed. Do not substitute minimum loop strength for mounting retention strength.
Ordering Information
Provide the complete model and applicable dimensions, material and colour when requesting a quotation.