157-00208 M6 Weld Stud Stand-Off Cable Tie
Übersicht
The YOCL Electric 157-00208 integrates a cable tie and M6 weld stud fixing in one component. It attaches directly to compatible Ø6.0 mm weld studs or threaded studs, securing cable bundles from Ø1.0 to 35.0 mm.
Its stand-off geometry separates the harness from the mounting surface. This provides clearance for routing around panel features and nearby components while using an existing stud as the attachment point.
Merkmale
- One-piece construction combines cable bundling, spacing and stud fixing.
- Push-on attachment uses a compatible Ø6.0 mm stud without a separate cable tie base, mounting screw or dedicated panel fixing hole.
- Stand-off geometry helps keep the bundle clear of the panel surface.
- The 160.0 mm strap supports narrow cable groups and larger harness bundles within its diameter range.
- A non-releasable plastic pawl secures the tie; minimum tie tensile strength is 200 N.
Technische Daten
Dimensions
Anwendungen
- Automotive wire harnesses and vehicle electrical systems.
- Cable routing on vehicle body panels with existing compatible studs.
- Assemblies requiring separation between the harness and mounting surface.
- Industrial machinery, transportation equipment and electrical equipment using stud mounting points.
Installation and Ordering
- Confirm that the existing Ø6.0 mm stud is compatible with the integrated fixing.
- Push the fixing onto the stud until engaged, then check mechanical retention.
- Position the harness, wrap the tie around the bundle and feed the strap through the locking head.
- Tighten to secure the bundle, then check routing and clearance from the mounting surface.
Order by part number 157-00208 for the black PA66HS version. Select for a bundle diameter within Ø1.0–35.0 mm and verify stud fit and available clearance in the assembly.
