Übersicht
The YOCL ELECTRIC 156-00360 Rundloch-Druckbefestigungs-Kabelbinder mit Scheibe secures cables and wire harnesses directly to panels. Its pre-assembled two-piece construction combines an outside-serrated cable tie with a fir-tree fixing and a Ø16.0 mm support disc.
The fixing fits Ø7.7–8.0 mm round holes in panels 0.8–6.0 mm thick. The tie accepts Ø2.0–45.0 mm bundles, measures 200.0 × 4.6 × 1.3 mm and has a minimum tensile strength of 225 N. The head can be repositioned after bundling for final routing alignment.
Merkmale
- Fir-tree fixing pushes into a compatible panel hole without a separate screw or adhesive mounting base.
- Ø16.0 mm support disc contacts the panel to help stabilize the fixing point.
- Pre-assembled two-piece construction allows head repositioning after bundling.
- Outside serrations provide a comparatively smooth inner strap surface facing the bundle.
- Non-releasable plastic-pawl closure retains the cable bundle.
- Black PA66HS construction; -40°C to +105°C operating temperature, UL 94 V-2 flammability classification and RoHS compliance.
Technische Daten
Abmessung
Installationshinweise
- Use a Ø7.7–8.0 mm round mounting hole in a panel 0.8–6.0 mm thick.
- Push the fir-tree fixing into the hole and confirm that the Ø16.0 mm support disc is seated against the panel.
- Wrap the tie around the cable or harness and tighten it through the locking head.
- Reposition the head if needed and check that the fixing and bundle are securely retained.
The fixing is also suitable for compatible threaded holes.
Anwendungen
- Automotive wire harnesses and vehicle electrical systems.
- Panel-mounted cable routing in electrical equipment.
- Industrial machinery and control-panel wiring.
- Transportation equipment and appliance wiring.
Bestellinformationen
For enquiries, specify part number 156-00360, quantity, mounting-hole size, panel thickness and bundle diameter.
