Übersicht
The YOCL ELECTRIC 157-00209 M5 Stud-Mount Adjustable Cable Tie secures cables and wire harnesses to compatible Ø5.0 mm weld studs or ISO-style mounting studs. Its one-piece construction integrates the tie with a low-profile stud fixing.
The fixing provides approximately 5–6 mm of lateral adjustment for final harness alignment. The outside-serrated tie accepts Ø1.0–35.0 mm bundles, measures 163.0 × 4.6 × 1.35 mm and has a minimum tensile strength of 200 N.
Merkmale
- Push-on stud fixing attaches directly to compatible Ø5.0 mm studs without a separate adhesive mounting base.
- Approximately 5–6 mm lateral adjustment allows the bundle position to be fine-tuned relative to the stud.
- Low-profile fixing supports compact routing; the mounting design can be used in stacked arrangements.
- Integrated construction maintains a defined tie-head position relative to the fixing.
- Outside serrations provide a comparatively smooth inner strap surface; the plastic-pawl closure is non-releasable.
- Black PA66HS construction; -40°C to +105°C operating temperature, UL 94 V-2 material flammability classification and RoHS compliance.
Technische Daten
Abmessung
Installation Notes
- Verify compatibility with the mounting stud and confirm a stud diameter of 5.0 mm.
- Align the integrated fixing with the stud and push it on until securely retained.
- Adjust the fixing laterally within the available approximate 5–6 mm range if needed.
- Wrap the tie around the cable or harness, insert the strap through the locking head and tighten.
- Check the final harness position and confirm that the fixing and bundle are securely retained.
Anwendungen
- Automotive wire harnesses and vehicle electrical systems.
- Weld-stud cable routing and harness alignment.
- Parallel cable routing in transportation equipment.
- Industrial machinery and electrical equipment.
Bestellinformationen
For enquiries, specify part number 157-00209, quantity, stud configuration, bundle diameter and the required routing position.
