156-00287 Brida de orificio redondo con fijación a presión

YOCL Electric 156-00287 combines a cable tie and push-mount fixing element for bundling cables and securing them directly to a panel.

Fits Ø6.4–7.1 mm round holes in 0.8–3.0 mm thick panels.
Black 202 × 4.6 mm inside serrated tie for Ø4.0–45.0 mm bundles; minimum tensile strength 225 N.
Two-piece construction with a repositionable tie head and Ø16.0 mm support disc.
PA66HS tie and PA66 fixing element; operating temperature −40 to +85 °C.
Push-in mounting requires no screw or separate mounting base.

Consultar sobre este producto

Descripción general

The YOCL Electric 156-00287 round hole push-mount cable tie bundles cables and secures them directly to a panel. Its preassembled two-piece construction combines an inside serrated tie with a push-mount fixing element for automotive harnesses and industrial wiring.

The fixing foot pushes into Ø6.4–7.1 mm round holes in panels 0.8–3.0 mm thick. A Ø16.0 mm support disc contacts the panel surface and covers the mounting opening to help stabilize the fixing point.

Características

Push-in panel fixing: Installs without screws, adhesive mounts or a separate cable tie base.
Repositionable head: The tie head can be repositioned after bundling to align the harness with its routing direction.
Bundle capacity: Secures Ø4.0–45.0 mm bundles with a minimum tie tensile strength of 225 N.
Support disc: Provides contact around the mounting hole.
Separate component materials: Heat stabilized PA66HS for the tie and PA66 for the fixing element.

Especificaciones técnicas

Parámetro	Especificación
Marca	YOCL Eléctrico
Número de pieza	156-00287
Construcción	Preassembled, two-piece
Método de fijación	Round hole push mount
Diámetro del orificio de montaje	Ø6.4–7.1 mm
Grosor del panel	0.8–3.0 mm
Bundle diameter	Ø4.0–45.0 mm
Minimum tie tensile strength	225 N
Cable tie material	PA66HS — heat stabilized polyamide 6.6
Fixing element material	PA66 — polyamide 6.6
Color	Negro
Serration	Inside serrated
Closure	Plastic pawl
Releasable	No
Temperatura de funcionamiento	−40 a +85 °C
Material flammability classification	UL 94 V-2
RoHS	Compliant
Dedicated panel-mounting tool	Not required

Dimensión

Dimensión	Value
Tie length (L)	202 mm
Tie width (W)	4.6 mm
Tie thickness (T)	1.2 mm
Fixing height (H2)	7.5 mm
Support disc diameter	Ø16.0 mm

Aplicaciones

Automotive wiring harnesses and vehicle electrical systems.
Panel wiring, control panels and switchgear.
Industrial machinery and transportation equipment.
Appliance wiring and wire harness assembly.

Installation and Ordering

Check that the round hole diameter, panel thickness and bundle diameter are within the specified ranges. Push the fixing element into the hole, wrap the tie around the bundle and insert the strap into the locking head. Tighten the tie and reposition the head as needed. The panel fixing can be installed by hand.

For a quotation, specify part number 156-00287, quantity, panel thickness, mounting hole diameter and bundle diameter.