Tổng quan
The YOCL Electric 156-00287 round hole push-mount cable tie bundles cables and secures them directly to a panel. Its preassembled two-piece construction combines an inside serrated tie with a push-mount fixing element for automotive harnesses and industrial wiring.
The fixing foot pushes into Ø6.4–7.1 mm round holes in panels 0.8–3.0 mm thick. A Ø16.0 mm support disc contacts the panel surface and covers the mounting opening to help stabilize the fixing point.
Tính năng
- Push-in panel fixing: Installs without screws, adhesive mounts or a separate cable tie base.
- Repositionable head: The tie head can be repositioned after bundling to align the harness with its routing direction.
- Bundle capacity: Secures Ø4.0–45.0 mm bundles with a minimum tie tensile strength of 225 N.
- Support disc: Provides contact around the mounting hole.
- Separate component materials: Heat stabilized PA66HS for the tie and PA66 for the fixing element.
Thông số kỹ thuật
Kích thước
Ứng dụng
- Automotive wiring harnesses and vehicle electrical systems.
- Panel wiring, control panels and switchgear.
- Industrial machinery and transportation equipment.
- Appliance wiring and wire harness assembly.
Installation and Ordering
Check that the round hole diameter, panel thickness and bundle diameter are within the specified ranges. Push the fixing element into the hole, wrap the tie around the bundle and insert the strap into the locking head. Tighten the tie and reposition the head as needed. The panel fixing can be installed by hand.
For a quotation, specify part number 156-00287, quantity, panel thickness, mounting hole diameter and bundle diameter.
