156-00622 Side-Mount Edge Clip Cable Tie

The YOCL Electric 156-00622 Side-Mount Edge Clip Cable Tie secures harnesses to 1.0–3.0 mm panel edges using a pre-assembled two-piece fixing with an integrated metal retaining element.

Bundle diameter: Ø4.0–45.0 mm; strap: 200.0 × 4.6 × 1.3 mm.
Outside serrations leave a comparatively smooth inner surface against the bundle.
Non-releasable tie with 225 N minimum tensile strength.
Push-on mounting; cable tie head can be repositioned after bundling.
Black PA66HS tie and PA66HIRHS fixing; operating temperature: −40°C to +105°C.

Inquire about this product

156-00622 Side-Mount Edge Clip Cable Tie

Overview

The YOCL Electric 156-00622 is a pre-assembled two-piece cable tie and side-mount edge clip for automotive and industrial harness routing. It pushes onto panel edges 1.0–3.0 mm thick, with an integrated metal retaining element providing mechanical engagement.

The outside serrated strap leaves a comparatively smooth inner surface against the bundle. It accommodates diameters from Ø4.0 to 45.0 mm, and the cable tie head can be repositioned after bundling for final routing alignment.

Features

Side-mount fixing provides a routing point alongside the panel edge.
Direct edge mounting requires no fixing hole, screw or adhesive base.
Outside serrations reduce direct serration contact with cable insulation.
Pre-assembled components support manual push-on installation and head repositioning after bundling.
The non-releasable tie provides a minimum tensile strength of 225 N.

Technical Specifications

Specification	Value
Brand	YOCL Eléctrico
Part number	156-00622
Product type	Side-mount edge clip cable tie
Construction	Pre-assembled, two-piece
Fixing method	Push-on panel edge clip
Panel thickness	1.0–3.0 mm
Bundle diameter	Ø4.0–45.0 mm
Minimum tie tensile strength	225 N
Cable tie material	PA66HS, heat stabilized polyamide 6.6
Fixing element material	PA66HIRHS, high impact modified, heat stabilized polyamide 6.6
Retaining element	Integrated metal element
Color	Black
Serration	Outside serrated
Releasable	No
Operating temperature	−40°C to +105°C
Material flammability	UL 94 HB
RoHS	Compliant

Dimensions

Dimension	Value
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Cable tie thickness / height (T / H)	1.3 mm
Fixing height (H2)	15.5 mm
Fixing length (L2)	14.0 mm
Fixing width (W2)	12.0 mm

Aplicaciones

Automotive wire harnesses and vehicle electrical assemblies.
Panel-edge cable routing without dedicated mounting holes.
Pipes and hoses secured along compatible panel edges.
Industrial machinery, electrical equipment and transportation assemblies.

Installation and Ordering

Select a panel edge within the 1.0–3.0 mm thickness range.
Push the clip onto the edge at the intended routing location and check engagement of the metal retaining element.
Wrap the tie around the bundle, feed the strap through the locking head and tighten to secure it.
Reposition the cable tie head as needed, then check clip retention and bundle security.

No dedicated panel-mounting tool is required. Order by part number 156-00622 for the black PA66HS tie with PA66HIRHS fixing. Confirm panel thickness, bundle diameter and clearance for the fixing element before selecting for an assembly.