156-00674 Top-Mount Edge Clip Cable Tie

The YOCL ELECTRIC 156-00674 top-mount edge clip cable tie secures cables, wire harnesses, pipes and hoses on 3.0–6.0 mm panel edges without a mounting hole.

Outside-serrated tie for 1.5–45.0 mm bundles.
Tie dimensions: 200.0 × 4.6 × 1.3 mm; 225 N minimum tensile strength.
Pre-assembled two-piece construction with a repositionable tie head.
Integrated metal retaining element for tool-free push-on mounting.
Negro PA66HS tie / PA66HIRHS fixing body; −40°C to +105°C operating temperature, UL 94 HB classification and RoHS compliance.

Consultar sobre este producto

Descripción general

The YOCL ELECTRIC 156-00674 Top-Mount Edge Clip Cable Tie is a pre-assembled, two-piece fastening for securing cables, wire harnesses, pipes and hoses to 3.0–6.0 mm thick panel edges. Its top-mount configuration positions the bundle relative to the top of the panel edge. An integrated metal retaining element engages the panel during push-on installation, without a mounting hole, screw or adhesive fixing base.

The 200.0 mm outside-serrated cable tie accommodates 1.5–45.0 mm bundle diameters and has a minimum tensile strength of 225 N. Its comparatively smooth inner strap surface helps reduce direct serration contact with cable insulation. The tie head can be repositioned after bundling to adjust the final harness routing.

Características

Top-mount edge fixing: provides a defined bundle position relative to the panel edge.
3.0–6.0 mm panel compatibility: fits thicker panel edges within the stated range.
Integrated metal retention: mechanically engages the panel during manual push-on installation.
Correa dentada exterior: presents a comparatively smooth inner surface to the bundle.
Repositionable tie head: supports final harness alignment after bundling.
Heat-stabilized materials: PA66HS tie and high-impact modified PA66HIRHS fixing body.

Especificaciones técnicas

Parámetro	Especificación
Marca	YOCL ELÉCTRICO
Número de pieza	156-00674
Tipo de producto	Top-mount edge clip cable tie
Construcción	Pre-assembled, two-piece assembly
Método de fijación	Top-mount edge clip
Grosor del panel	3.0–6.0 mm
Bundle diameter	1.5–45.0 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized Polyamide 6.6
Fixing element body material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Retaining element	Integrated metal component
Color	Negro
Serration	Outside serrated
Releasable	No
Tie head positioning	Repositionable after bundling
Temperatura de funcionamiento	−40°C to +105°C
Flammability classification	UL 94 HB
RoHS	Compliant
Mounting hole required	No
Instalación	Tool-free push-on edge mounting

Dimensión

Dimensión	Value
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Strap thickness (T) / height (H)	1.3 mm
Fixing height (H2)	17.8 mm
Fixing length (L2)	14.8 mm
Fixing width (W2)	14.0 mm
Compatible panel thickness	3.0–6.0 mm
Bundle diameter range	1.5–45.0 mm

Notas de instalación

Select a compatible panel edge 3.0–6.0 mm thick.
Position the top-mount clip at the required location and push it onto the edge.
Check that the metal retaining element is engaged with the panel.
Wrap the cable tie around the bundle, insert the strap through the locking head and tighten it.
Reposition the tie head as required for final routing.

The 225 N value specifies minimum cable tie tensile strength; it is not an edge-clip pull-off load or installation tension.

Aplicaciones

Automotive wire harness routing on compatible panel edges.
Vehicle interior electrical assemblies.
Pipe and hose fixing along panel edges.
Cable routing in industrial machinery and electrical equipment.
Harness assembly for transportation equipment and panel building.

Información de pedido

Specify 156-00674, the required quantity, panel thickness and bundle diameter when requesting a quotation. This model has a black PA66HS tie and PA66HIRHS fixing body, an integrated metal retaining element, and a 200.0 mm outside-serrated cable tie para 3.0–6.0 mm panels.