BZW Spring Ball-Lock Stainless Steel Cable Ties
Uncoated stainless steel ball-lock cable ties with a wavy spring section for fastening round and smooth bundles.
- Listed steel grades: 201, 304 and 316.
- 16 width/length entries with width-specific strength and tools.
- Working temperature: −80 °C to +538 °C.
- Widths: 4.6 mm, 7.9 mm.
Descripción general
The YOCL ELECTRIC BZW Spring Ball-Lock Stainless Steel Cable Ties use a self-locking ball mechanism. Uncoated stainless steel ball-lock cable ties with a wavy spring section for fastening round and smooth bundles.
The spring section provides compliance when tensioning the band around a bundle. The supplied information gives no quantified spring force or load-displacement curve.
Características
- Ball-lock construction: Self-locking band fastening.
- Material options: Stainless steel grades 201, 304 and 316, as listed.
- Width-specific selection: Separate tensile-strength and tooling information for each band width.
- Spring section: Wavy band section for compliance around round and smooth bundles.
Especificaciones técnicas
| Parameter | Specification |
|---|---|
| Series | BZW |
| Locking mechanism | Ball-lock self-locking |
| Stainless steel grades listed | 201; 304; 316 |
| Widths | 4.6 mm; 7.9 mm |
| Listed thickness options | 0.25 mm |
| Finish | Uncoated metal |
| Working temperature | −80 °C to +538 °C |
| Band design | Wavy spring section |
The source does not assign individual steel grades or thickness options to separate order codes or strength-test configurations.
Dimensión
Width, Strength and Tools
| Width W (mm) | Thickness options (mm) | Minimum tensile strength (N) | Listed strength (lbf) | Recommended tools |
|---|---|---|---|---|
| 4.6 | 0.25 | 1,000 | 225 | CT02; HT-338 |
| 7.9 | 0.25 | 2,220 | 500 | CT02; HT-338 |
The N and lbf figures are reproduced as supplied, rather than presented as exact unit conversions.
Size Table
Primary dimensions are in millimetres. Inch dimensions are rounded conversions.
| Size W × L (mm) | Width W (mm) | Length L (mm) | Width (inch) | Length (inch) |
|---|---|---|---|---|
| 4.6×200 | 4.6 | 200 | 0.18 | 7.9 |
| 4.6×360 | 4.6 | 360 | 0.18 | 14.2 |
| 4.6×520 | 4.6 | 520 | 0.18 | 20.5 |
| 4.6×680 | 4.6 | 680 | 0.18 | 26.8 |
| 4.6×840 | 4.6 | 840 | 0.18 | 33.1 |
| 4.6×1000 | 4.6 | 1000 | 0.18 | 39.4 |
| 4.6×1200 | 4.6 | 1200 | 0.18 | 47.2 |
| 4.6×1400 | 4.6 | 1400 | 0.18 | 55.1 |
| 7.9×200 | 7.9 | 200 | 0.31 | 7.9 |
| 7.9×360 | 7.9 | 360 | 0.31 | 14.2 |
| 7.9×520 | 7.9 | 520 | 0.31 | 20.5 |
| 7.9×680 | 7.9 | 680 | 0.31 | 26.8 |
| 7.9×840 | 7.9 | 840 | 0.31 | 33.1 |
| 7.9×1000 | 7.9 | 1000 | 0.31 | 39.4 |
| 7.9×1200 | 7.9 | 1200 | 0.31 | 47.2 |
| 7.9×1400 | 7.9 | 1400 | 0.31 | 55.1 |
Thickness conversions: 0.25 mm ≈ 0.010 inch; 0.30 mm ≈ 0.012 inch; 0.40 mm ≈ 0.016 inch, where listed. Bundle diameter D is illustrated but no numerical bundle range is provided.
Ordering Information
Specify the series, width, length, thickness and stainless steel grade. Check the width-specific recommended tool and minimum tensile strength in the table above.
For the spring design, include the actual bundle dimensions and required band tension when selecting the supplied configuration.