Flat Hex Nickel-Plated Brass Breathable Vent Plugs
Flat Hex Nickel-Plated Brass Breathable Vent Plugs provide a threaded vent fitting for enclosure openings.
- Flat hexagonal head with a silicone sealing ring identified in the supplied drawing.
- Minimum air permeability ≥200 to ≥2300 mL/min at 70 mbar, depending on specification.
- Nickel-plated brass construction; catalog-listed IP68.
- Total length H, thread diameter, thread length GL and wrench dimension AG are listed for selection.
Descripción general
Flat Hex Nickel-Plated Brass Breathable Vent Plugs provide a vented fitting for threaded enclosure openings. Air permeability varies by specification and is listed as a minimum value at 70 mbar. The supplied catalog identifies brass construction with nickel plating and an IP68 protection level.
Características
- Flat hexagonal head with a silicone sealing ring identified in the supplied drawing.
- Minimum airflow and mechanical dimensions are listed together for each configuration.
- Nickel-plated brass finish throughout the listed range.
Especificaciones técnicas
| Parameter | Catalog specification |
|---|---|
| Material | Latón |
| Surface finish | Nickel plated |
| Air permeability test pressure | 70 mbar |
| Catalog-listed protection level | IP68; test depth and duration not supplied |
| Sealing ring | Silicone, as labelled in the drawing |
Models and Dimensions
All dimensions are in mm. Air permeability is in mL/min at 70 mbar. H is total length, GL is thread length, and AG is the wrench dimension.
The two M12×1.5 configurations have different total and thread lengths; both are retained without inventing an order code.
| Catalog specification | Minimum air permeability | H | Thread Ø | GL | AG |
|---|---|---|---|---|---|
| M5×0.8 | ≥200 | 9.2 | 5 | 5 | 8 |
| M6×1 | ≥200 | 9.2 | 6 | 5 | 10 |
| M8×1.25 | ≥550 | 12 | 8 | 7 | 12 |
| M8×1 | ≥800 | 12 | 8 | 7 | 12 |
| M10×1.5 | ≥600 | 13 | 10 | 8 | 14 |
| M12×1.5 | ≥1200 | 13 | 12 | 8 | 16 |
| M12×1.5 | ≥1200 | 15 | 12 | 10 | 16 |
| M14×1.5 | ≥2000 | 15 | 14 | 10 | 19 |
| M16×1.5 | ≥2300 | 15 | 16 | 10 | 20 |
| M20×1.5 | ≥2300 | 15 | 20 | 10 | 24 |
Selection Guide
Match the required thread form and pitch, minimum airflow, and installation space to the table. State the complete specification and quantity in an inquiry. For M12×1.5, also specify H and GL: 13/8 mm or 15/10 mm.
Dimensión
