YOCL ELÉCTRICO YC300-3 Precinto de alambre de acero recubierto de goma negra

YC300-3 Black Rubber-Coated Steel Wire Seal with an ABS sealing body and black rubber-coated steel wire.

Wire length: 300 mm; listed diameter: 1.8 mm.
Tensile strength: 661 lbf / 300 kgf.
Pliers required for removal after locking.
Custom body colors, wire lengths and printed identification.

Consultar sobre este producto

Descripción general

YOCL ELÉCTRICO YC300-3 Black Rubber-Coated Steel Wire Seal has an ABS sealing body and 300 mm black rubber-coated steel wire. The listed wire diameter is 1.8 mm, with specified tensile strength 661 lbf / 300 kgf.

This model uses black rubber-coated steel wire. The body can carry company identification and serial numbers by hot stamping or laser printing. Once locked, removal requires pliers.

Características

Wire length: 300 mm; listed wire diameter: 1.8 mm.
Specified tensile strength: 661 lbf / 300 kgf.
ABS body with black rubber-coated steel wire.
Pliers required for removal once locked.
Standard body colors and custom colors or wire lengths available.
Hot stamping or laser printing of company identification and serial numbers.

Especificaciones técnicas

Parámetro	Especificación
Marca	YOCL ELÉCTRICO
Modelo	YC300-3
Tipo de producto	Black Rubber-Coated Steel Wire Seal
Material	ABS plastic and black rubber-coated steel wire
Wire length	300 mm
Listed wire diameter	1.8 mm
Resistencia a la tracción	661 lbf / 300 kgf
Removal	Pliers required once locked
Body colors	Red, blue, green and yellow; custom colors available
Custom wire length	Available
Printing options	Hot stamping or laser printing of company logo/name and serial numbers

Dimensión

Wire length is 300 mm and the listed wire diameter is 1.8 mm. A custom wire length can be included in the enquiry.

Aplicaciones

Containers and container trucks; doors; tank trucks; rail cars; valves.

Información de pedido

For a quotation, specify YC300-3, quantity, body color and standard or custom wire length. Supply the company-logo or name artwork, serial-number requirements and the preferred hot-stamping or laser-printing method.