Bornes à lame DBN non isolées
DBN non-insulated blade terminals are bare copper crimp terminals with flat blade ends.
- 16 listed models with B, F, L, E, D and d dimensions.
- Catalog conductor groups 1.25, 2 and 5.5 cover 0.5–6 mm².
- Larger DBN8, DBN14 and DBN22 models have separate catalog Imax and thickness values.
Aperçu
DBN Non-Insulated Blade Terminals are bare copper crimp terminals with flat blade ends. The series covers 16 catalog models, with blade width and overall length varying by model.
Caractéristiques
- Uninsulated copper construction: the source identifies copper material and shows an exposed blade.
- Model-specific blade width: B ranges from 2.3 to 7.0 mm in the catalog.
- Dimensioned selection: B, F, L, E, D and d are listed for each model.
Spécifications techniques
| Paramètre | Catalog specification |
|---|---|
| Product type | Non-insulated blade terminal |
| Série | DBN |
| Matière | Copper |
| Listed models | 16 |
The catalog lists the following conductor ranges, AWG values, Imax and material thickness by model group. Operating conditions for Imax are not given.
| DBN group | Conductor section (mm²) | AWG | Catalog Imax (A) | Material thickness (mm) |
|---|---|---|---|---|
| 1.25 | 0.5–1.5 | 22–16 | 19 | 0.7 |
| 2 | 1.5–2.5 | 16–14 | 27 | 0.8 |
| 5.5 | 4–6 | 12–10 | 48 | 1.0 |
For DBN8-14, DBN14-16 and DBN22-17, the catalog lists Imax values of 62, 88 and 115 A and material thicknesses of 1.2, 1.5 and 1.7 mm respectively; conductor ranges are not stated for these three models.
Dimension
All dimensions are in millimeters. E, D and d are shared within the first three model groups and are shown per row for easy comparison.
| Modèle | B | F | L | E | D | d |
|---|---|---|---|---|---|---|
| DBN1.25-10 | 2.3 | 10.0 | 14.8 | 4.8 | 3.4 | 1.7 |
| DBN1.25-11 | 3.0 | 11.0 | 15.8 | 4.8 | 3.4 | 1.7 |
| DBN1.25-14S | 2.4 | 14.0 | 18.8 | 4.8 | 3.4 | 1.7 |
| DBN1.25-14L | 3.0 | 14.0 | 18.8 | 4.8 | 3.4 | 1.7 |
| DBN1.25-18 | 2.3 | 18.0 | 22.8 | 4.8 | 3.4 | 1.7 |
| DBN2-9 | 2.8 | 9.0 | 13.8 | 4.8 | 4.1 | 2.3 |
| DBN2-10 | 2.8 | 10.0 | 14.8 | 4.8 | 4.1 | 2.3 |
| DBN2-14S | 2.4 | 14.0 | 18.8 | 4.8 | 4.1 | 2.3 |
| DBN2-14L | 3.0 | 14.0 | 18.8 | 4.8 | 4.1 | 2.3 |
| DBN2-18 | 2.3 | 18.0 | 22.8 | 4.8 | 4.1 | 2.3 |
| DBN5.5-10 | 2.8 | 10.0 | 16.0 | 6.0 | 5.6 | 3.4 |
| DBN5.5-14 | 4.5 | 14.0 | 20.0 | 6.0 | 5.6 | 3.4 |
| DBN5.5-18 | 4.5 | 18.0 | 24.0 | 6.0 | 5.6 | 3.4 |
| DBN8-14 | 6.0 | 14.0 | 22.5 | 8.5 | 7.2 | 4.5 |
| DBN14-16 | 6.0 | 16.0 | 27.0 | 10.5 | 9.0 | 5.8 |
| DBN22-17 | 7.0 | 17.0 | 29.0 | 12.0 | 11.5 | 7.7 |
Guide de sélection
Choose a model for the conductor size and mating connection, then compare blade width B and the remaining dimensions with the equipment opening.
Informations de commande
Provide the full DBN model code and required quantity when requesting a quotation.