Pengikat Kabel Tahan Panas GT 180°C
GT heat resistant cable ties secure cable and pipe bundles using internal serrations and a locking head.
- Polyamide 6.6 (PA66), with catalogue material flammability designation 94V-2.
- Catalogue operating temperature: −40 to +180 °C.
- Natural and black are the listed colors.
- Lengths from 80 to 1530 mm; widths from 2.4 to 9 mm.
- Select by maximum bundle diameter and model-specific minimum loop tensile strength.
Tinjauan
GT 180°C heat resistant cable ties are listed for securing cable and pipe bundles. Internal serrations engage the locking head, and the catalogue describes a head design intended to combine strong retention with low insertion force. The series uses polyamide 6.6 and is listed in natural and black colors.
Fitur
- Internal serrations hold cable and pipe bundles.
- Catalogue sizes cover lengths from 80 to 1530 mm and widths from 2.4 to 9 mm.
- Model-specific maximum bundle diameters and minimum loop tensile strengths support size selection.
- The catalogue lists an operating temperature range of −40 to +180 °C.
Spesifikasi Teknis
| Parameter | Catalogue specification |
|---|---|
| Series | GT |
| Material | Polyamide 6.6 (PA66) |
| Material flammability designation | 94V-2, as stated in the catalogue |
| Colors | Natural, black |
| Operating temperature | −40 to +180 °C; exposure duration not specified |
| Minimum loop tensile strength | 8.2, 14, 18.2, 22.6, 54.5 or 79.3 kgf, depending on model |
Dimensi
Metric and inch dimensions, and kgf/lb force values, are reproduced from the catalogue. Model spacing has been normalized for readability. Minimum loop tensile strength is a loop test value, not a permissible working load.
| Part number | Length (mm) | Length (in) | Width (mm) | Width (in) | Max. bundle Ø (mm) | Max. bundle Ø (in) | Min. loop tensile (kgf) | Min. loop tensile (lb) |
|---|---|---|---|---|---|---|---|---|
| GT-80MH180 | 80 | 3.15 | 2.4 | 0.09 | 15 | 0.59 | 8.2 | 18 |
| GT-100MH180 | 100 | 3.94 | 2.5 | 0.1 | 22 | 0.87 | 8.2 | 18 |
| GT-120MH180 | 120 | 4.72 | 2.5 | 0.1 | 30 | 1.18 | 8.2 | 18 |
| GT-140MH180 | 140 | 5.51 | 2.5 | 0.1 | 33 | 1.3 | 8.2 | 18 |
| GT-160MH180 | 160 | 6.3 | 2.5 | 0.1 | 40 | 1.57 | 8.2 | 18 |
| GT-200MH180 | 200 | 7.87 | 2.5 | 0.1 | 53 | 2.09 | 8.2 | 18 |
| GT-250MH180 | 250 | 9.84 | 2.8 | 0.11 | 65 | 2.56 | 14 | 31 |
| GT-300MH180 | 300 | 11.81 | 2.8 | 0.11 | 76 | 2.99 | 14 | 31 |
| GT-120IH180 | 120 | 4.72 | 3.6 | 0.14 | 30 | 1.18 | 18.2 | 40 |
| GT-140IH180 | 140 | 5.51 | 3.6 | 0.14 | 33 | 1.3 | 18.2 | 40 |
| GT-150IH180 | 150 | 5.91 | 3.6 | 0.14 | 35 | 1.38 | 18.2 | 40 |
| GT-180IH180 | 180 | 7.09 | 3.6 | 0.14 | 44 | 1.73 | 18.2 | 40 |
| GT-200IH180 | 200 | 7.87 | 3.6 | 0.14 | 53 | 2.09 | 18.2 | 40 |
| GT-250IH180 | 250 | 9.84 | 3.6 | 0.14 | 65 | 2.56 | 18.2 | 40 |
| GT-300IH180 | 300 | 11.81 | 3.6 | 0.14 | 76 | 2.99 | 18.2 | 40 |
| GT-370IH180 | 370 | 14.57 | 3.6 | 0.14 | 102 | 4.02 | 18.2 | 40 |
| GT-120STH180 | 120 | 4.72 | 4.8 | 0.19 | 24 | 0.94 | 22.6 | 50 |
| GT-160STH180 | 160 | 6.3 | 4.8 | 0.19 | 38 | 1.5 | 22.6 | 50 |
| GT-190STH180 | 190 | 7.48 | 4.8 | 0.19 | 46 | 1.81 | 22.6 | 50 |
| GT-200STH180 | 200 | 7.87 | 4.8 | 0.19 | 50 | 1.97 | 22.6 | 50 |
| GT-250STH180 | 250 | 9.84 | 4.8 | 0.19 | 60 | 2.36 | 22.6 | 50 |
| GT-280STH180 | 280 | 11.02 | 4.8 | 0.19 | 70 | 2.76 | 22.6 | 50 |
| GT-300STH180 | 300 | 11.81 | 4.8 | 0.19 | 76 | 2.99 | 22.6 | 50 |
| GT-370STH180 | 370 | 14.57 | 4.8 | 0.19 | 102 | 4.02 | 22.6 | 50 |
| GT-390STH180 | 390 | 15.35 | 4.8 | 0.19 | 105 | 4.13 | 22.6 | 50 |
| GT-430STH180 | 430 | 16.93 | 4.8 | 0.19 | 110 | 4.33 | 22.6 | 50 |
| GT-450STH180 | 450 | 17.72 | 4.8 | 0.19 | 116 | 4.57 | 22.6 | 50 |
| GT-530STH180 | 530 | 20.87 | 4.8 | 0.19 | 140 | 5.51 | 22.6 | 50 |
| GT-150HDH180 | 150 | 5.91 | 7.6 | 0.3 | 33 | 1.3 | 54.5 | 120 |
| GT-200HDH180 | 200 | 7.87 | 7.6 | 0.3 | 50 | 1.97 | 54.5 | 120 |
| GT-250HDH180 | 250 | 9.84 | 7.6 | 0.3 | 65 | 2.56 | 54.5 | 120 |
| GT-300HDH180 | 300 | 11.81 | 7.6 | 0.3 | 76 | 2.99 | 54.5 | 120 |
| GT-370HDH180 | 370 | 14.57 | 7.6 | 0.3 | 102 | 4.02 | 54.5 | 120 |
| GT-430HD-SH180 | 430 | 16.93 | 7.6 | 0.3 | 125 | 4.92 | 54.5 | 120 |
| GT-450HD-SH180 | 450 | 17.72 | 7.6 | 0.3 | 132 | 5.2 | 54.5 | 120 |
| GT-540HD-SH180 | 533 | 20.98 | 7.6 | 0.3 | 140 | 5.51 | 54.5 | 120 |
| GT-430HDH180 | 430 | 16.93 | 9 | 0.35 | 120 | 4.72 | 79.3 | 175 |
| GT-530HDH180 | 530 | 20.87 | 9 | 0.35 | 140 | 5.51 | 79.3 | 175 |
| GT-630HDH180 | 609 | 23.98 | 9 | 0.35 | 178 | 7.01 | 79.3 | 175 |
| GT-710HDH180 | 710 | 27.95 | 9 | 0.35 | 190 | 7.48 | 79.3 | 175 |
| GT-780HDH180 | 778 | 30.63 | 9 | 0.35 | 228 | 8.99 | 79.3 | 175 |
| GT-830HDH180 | 815 | 32.09 | 9 | 0.35 | 239 | 9.42 | 79.3 | 175 |
| GT-920HDH180 | 916 | 36.06 | 9 | 0.35 | 263 | 10.4 | 79.3 | 175 |
| GT-1220HDH180 | 1220 | 48.03 | 9 | 0.35 | 365 | 14.4 | 79.3 | 175 |
| GT-1530HDH180 | 1530 | 60.24 | 9 | 0.35 | 460 | 18.1 | 79.3 | 175 |
Panduan Pemilihan
Choose the required bundle diameter first, then compare tie length, width and minimum loop tensile strength. Include the exact part number, color and quantity in an enquiry. The listed 180 °C maximum does not specify continuous exposure duration or retained tensile strength at that temperature; include the actual temperature and exposure duration when selecting for elevated-temperature service.