MG EMC Metal Cable Glands – PG Thread
MG EMC metal cable glands are a PG-thread series for metal cable entries where an EMC-style gland is specified. Select from PG7 to PG36 by cable outside diameter and mounting-hole size.
- Nickel-plated brass metal parts
- Nylon PA fastener with NBR sealing components
- 16 catalogue models across eight PG thread sizes
- Model-specific cable ranges, thread lengths and spanner sizes listed below
Overview
MG EMC metal cable glands are nickel-plated brass cable-entry fittings in the PG-thread series shown in the supplied catalogue. The listed models span PG7 through PG36, with two cable clamping ranges for each thread size. Choose the model by cable outside diameter, PG thread and the dimensions of the enclosure entry.
The source identifies a nylon PA fastener and NBR sealing components, including the O-ring. The catalogue presents this as an EMC gland series; it does not provide a quantified shielding or transfer-impedance value for the listed models.
Features
- PG thread selection: Eight PG sizes, each with two stated cable ranges.
- Metal body: Nickel-plated brass construction specified for the series.
- Sealing components: NBR seal and O-ring listed in the source catalogue.
- Model-specific dimensions: Mounting-hole diameter, thread length and spanner size are listed for selection.
Technical Specifications
| Parameter | Specification |
|---|---|
| Series | MG EMC |
| Product type | Metal cable gland |
| Listed thread system | PG |
| Listed sizes | PG7, PG9, PG11, PG13.5, PG16, PG21, PG29, PG36 |
| Metal material | Nickel-plated brass |
| Fastener | Nylon PA |
| Seal and O-ring | NBR rubber |
| Cable clamping range | Model dependent; see table |
Dimension
Cable ranges below are outside diameters in mm. Thread outside diameter, mounting-hole range and thread length (GL) are also in mm. Spanner size retains the two-value notation printed in the catalogue.
| Catalogue code | PG thread | Cable Ø (mm) | Thread O.D. (mm) | Mounting hole (mm) | GL (mm) | Spanner (mm) |
|---|---|---|---|---|---|---|
| VO-E.PG7A-EMC | PG7 | 3–5.3 | 12.5 | 12.5–12.8 | 8 | 17/17 |
| VO-E.PG7B-EMC | PG7 | 4.5–7.8 | 12.5 | 12.5–12.8 | 8 | 17/17 |
| VO-E.PG9A-EMC | PG9 | 3–5.8 | 15.2 | 15.2–15.5 | 8 | 18/18 |
| VO-E.PG9B-EMC | PG9 | 4.5–7.8 | 15.2 | 15.2–15.5 | 8 | 18/18 |
| VO-E.PG11A-EMC | PG11 | 4–7 | 18.6 | 18.6–18.9 | 9 | 22/22 |
| VO-E.PG11B-EMC | PG11 | 6–10 | 18.6 | 18.6–18.9 | 9 | 22/22 |
| VO-E.PG13.5A-EMC | PG13.5 | 5–8.8 | 20.4 | 20.4–20.7 | 9.5 | 24/24 |
| VO-E.PG13.5B-EMC | PG13.5 | 7–12 | 20.4 | 20.4–20.7 | 9.5 | 24/24 |
| VO-E.PG16A-EMC | PG16 | 7–11 | 22.5 | 22.5–22.8 | 9.5 | 26/26 |
| VO-E.PG16B-EMC | PG16 | 9–14 | 22.5 | 22.5–22.8 | 9.5 | 26/26 |
| VO-E.PG21A-EMC | PG21 | 12–16 | 28.3 | 28.3–28.7 | 12 | 32/32 |
| VO-E.PG21B-EMC | PG21 | 14–18 | 28.3 | 28.3–28.7 | 12 | 32/32 |
| VO-E.PG29A-EMC | PG29 | 16–22 | 37 | 37–37.4 | 12.5 | 41/41 |
| VO-E.PG29B-EMC | PG29 | 18–25 | 37 | 37–37.4 | 12.5 | 41/41 |
| VO-E.PG36A-EMC | PG36 | 21–25 | 47 | 47–47.4 | 15 | 50/50 |
| VO-E.PG36B-EMC | PG36 | 24–30 | 47 | 47–47.4 | 15 | 50/50 |
Selection Guide
Start with the enclosure’s PG thread and the measured outside diameter of the cable. Choose an A or B model whose clamping range covers that diameter, then check mounting-hole range, thread length and spanner size against the installation. Provide the full catalogue code and quantity when requesting a quotation.
Dimension
