TJ Marine Cable Gland
The TJ Marine Cable Gland is a brass-and-steel cable entry fitting with an NBR clamping ring for unarmoured marine cables.
- Ten models cover cable ranges from 5–7 mm to 48–57 mm.
- Metric D threads range from M16 × 1 to M71 × 2, depending on model.
- IP54 protection within the specified cable range when tightened with the rubber gasket.
- Static operating range: −40 to +110 °C; dynamic range: −20 to +80 °C.
Overview
The TJ Marine Cable Gland provides cable entry, retention and sealing for unarmoured marine cable installations. The series covers ten model sizes, from VO-TJ8 for 5–7 mm cable to VO-TJ58 for 48–57 mm cable.
The D component is brass, the D1 component is steel, and the clamping ring is NBR. Select the gland by the cable diameter, equipment entry thread and model dimensions.
Features
- Brass and steel body components with an NBR clamping ring.
- Ten model sizes with specified cable ranges and Metric D threads.
- IP54 protection when tightened with the rubber gasket within the specified cable range.
- Model-specific d, D, d1, D1, H and H1 dimensions support fit checks.
Technical Specifications
| Parameter | Specification |
|---|---|
| Series | TJ marine type |
| Cable type | Unarmoured cable |
| D component | Brass |
| D1 component | Steel |
| Clamping ring | NBR |
| Protection degree | IP54 within the specified cable range when tightened with the rubber gasket |
| Static operating temperature | −40 to +110 °C |
| Dynamic operating temperature | −20 to +80 °C |
| D thread range | M16 × 1 to M71 × 2; model-specific |
Dimension
All d, D1, H and H1 values are in millimetres. D and d1 are threaded dimensions; the supplied table does not state the pitch for d1.
| Code | Gland size | d | D | d1 | D1 | H | H1 | Cable range (mm) |
|---|---|---|---|---|---|---|---|---|
| VO-TJ8 | TJ-8 | 8 | M16 × 1 | M13 | 20 | 32 | 3 | 5–7 |
| VO-TJ13 | TJ-13 | 13 | M20 × 1 | M17 | 24 | 35 | 8 | 6–12 |
| VO-TJ16 | TJ-16 | 16 | M27 × 1.5 | M22 | 32 | 40 | 8 | 11–15 |
| VO-TJ19 | TJ-19 | 19 | M30 × 1.5 | M24 | 35 | 42 | 8 | 14–18 |
| VO-TJ24 | TJ-24 | 24 | M35 × 1.5 | M30 | 41 | 44 | 8 | 17–23 |
| VO-TJ28 | TJ-28 | 28 | M42 × 2 | M35 | 49 | 46 | 8 | 22–27 |
| VO-TJ34 | TJ-34 | 34 | M47 × 2 | M42 | 53 | 49 | 8 | 26–33 |
| VO-TJ42 | TJ-42 | 42 | M55 × 2 | M50 | 60 | 54 | 8 | 32–41 |
| VO-TJ50 | TJ-50 | 50 | M62 × 2 | M58 | 69 | 56 | 8 | 40–49 |
| VO-TJ58 | TJ-58 | 58 | M71 × 2 | M66 | 80 | 56 | 8 | 48–57 |
Selection Guide
Select the model by the actual cable diameter and equipment entry thread. Check the complete dimension set against the installation space, and obtain the d1 thread pitch before specifying a mating component.
Aplikasi
The source lists cable fastening in ships, instruments, machinery, electrical equipment and transport installations.
Ordering Information
Provide the complete VO-TJ code, quantity, cable diameter and equipment entry thread when requesting a quotation.
Dimension
