126-00241 Abraçadeira de clipe de borda de uma peça

The YOCL ELECTRIC 126-00241 one-piece edge clip cable tie secures cables and wire harnesses directly to panel edges without a mounting hole.

Fits 1.0–3.0 mm panel thicknesses and 1.0–35.0 mm bundle diameters.
155.0 mm long, 4.6 mm wide outside-serrated tie.
180 N minimum cable tie tensile strength; non-releasable plastic-pawl closure.
Integrated metal spring clamp for tool-free push-on edge mounting.
Black PA66HS molded body; −40°C to +105°C operating temperature and UL 94 V-2 flammability classification.

Inquire about this product

Overview

The YOCL ELECTRIC 126-00241 One-Piece Edge Clip Cable Tie combines a cable tie and panel-edge fixing body in one molded component. An integrated metal spring clamp grips a compatible plastic or metal panel edge 1.0–3.0 mm thick, providing a push-on mounting point without drilling a hole.

The outside-serrated tie accommodates 1.0–35.0 mm diameter bundles and has a minimum tensile strength of 180 N. Its black PA66HS molded body is made from heat-stabilized Polyamide 6.6, with an operating temperature range of −40°C to +105°C.

Features

One-piece molded construction: combines bundling and edge fixing for simpler handling during harness assembly.
Direct edge mounting: attaches without a panel hole, separate mounting base, screw or adhesive.
Metal spring clamp: provides mechanical engagement with the compatible panel edge.
Outside serrations: leave a comparatively smooth inner strap surface against the bundle.
Non-releasable plastic-pawl closure: locks the strap around the bundle.
Heat-stabilized PA66 body: specified as PA66HS with UL 94 V-2 flammability classification.

Technical Specifications

Parameter	Specification
Brand	YOCL ELECTRIC
Part number	126-00241
Product type	One-piece edge clip cable tie
Construction	One-piece molded cable tie and edge-fixing body
Fixing method	Edge clip
Retaining element	Integrated metal spring clamp
Compatible panel material	Plastic or metal
Panel thickness	1.0–3.0 mm
Bundle diameter	1.0–35.0 mm
Minimum cable tie tensile strength	180 N
Molded body material	PA66HS — heat-stabilized Polyamide 6.6
Colour	Black
Serration	Outside serrated
Closure	Plastic pawl
Releasable	No
Operating temperature	−40°C to +105°C
Flammability classification	UL 94 V-2
RoHS	Compliant
Mounting hole required	No
Installation	Tool-free push-on edge mounting

Dimension

Dimension	Value
Cable tie length (L)	155.0 mm
Cable tie width (W)	4.6 mm
Height (H) / strap thickness	1.35 mm
Fixing length (L2)	15.0 mm
Compatible panel thickness	1.0–3.0 mm
Bundle diameter range	1.0–35.0 mm

Installation Notes

Select a compatible plastic or metal panel edge 1.0–3.0 mm thick.
Wrap the integrated cable tie around the bundle, insert the strap through the locking head and tighten it.
Position the edge clip over the panel edge and push it onto the panel.
Check that the metal retaining element is engaged with the edge.

The 180 N value specifies minimum cable tie tensile strength; it is not an edge-clip pull-off load or installation tension.

Aplicações

Automotive wire harness routing along panel edges.
Vehicle interior electrical assemblies.
Harness assembly for transportation equipment.
Cable routing in industrial machinery and electrical equipment.
Control-panel and panel-building cable management.

Ordering Information

Specify 126-00241, the required quantity, panel material and thickness, and bundle diameter when requesting a quotation. This model has a black PA66HS molded body, an integrated metal spring clamp, and a 155.0 mm outside-serrated cable tie.