156-00618 Round Hole Push-Mount Cable Tie

The YOCL ELECTRIC 156-00618 round hole push-mount cable tie bundles wire harnesses and fixes them directly to a panel using a pre-assembled two-piece design.

Fits Ø4.5–5.0 mm round holes and 0.7–3.0 mm panels.
Inside-serrated 202 mm tie, 4.6 mm wide, for 4.0–45.0 mm bundles.
225 N minimum cable tie tensile strength.
Ø16.0 mm support disc; tie head can be repositioned after bundling.
Black PA66HS tie / PA66HIRHS fixing element; −40°C to +105°C operating temperature.

Inquire about this product

Overview

The YOCL ELECTRIC 156-00618 Round Hole Push-Mount Cable Tie is a pre-assembled, two-piece fastening for bundling wire harnesses and fixing them directly to a panel. Its push-mount element fits Ø4.5–5.0 mm round holes in panels 0.7–3.0 mm thick, with tool-free installation.

The inside-serrated cable tie accommodates 4.0–45.0 mm bundle diameters and has a minimum tensile strength of 225 N. A Ø16.0 mm support disc contacts the panel surface and helps stabilize the fixing point. The two-piece construction allows the tie head to be repositioned after bundling to align the harness with the required routing direction.

Features

Direct panel fixing: push-in mounting without screws, adhesives or a separate cable tie base.
Repositionable tie head: allows final adjustment of harness orientation after bundling.
Support disc: provides contact against the panel and covers the mounting opening.
Inside-serrated strap: uses a non-releasable plastic-pawl closure to secure the bundle.
Separate material grades: PA66HS for the cable tie and PA66HIRHS for the fixing element.
Specified operating range: −40°C to +105°C for automotive and industrial harness applications.

Technical Specifications

Parameter	Specification
Brand	YOCL ELECTRIC
Part number	156-00618
Product type	Round hole push-mount cable tie
Construction	Pre-assembled, two-piece assembly
Fixing method	Push mount
Mounting hole shape	Round
Mounting hole diameter	4.5–5.0 mm
Panel thickness	0.7–3.0 mm
Bundle diameter	4.0–45.0 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized Polyamide 6.6
Fixing element material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Colour	Black
Serration	Inside serrated
Closure	Plastic pawl
Releasable	No
Operating temperature	−40°C to +105°C
Flammability classification	UL 94 HB
RoHS	Compliant
Installation	Tool-free push-in panel mounting

Dimension

Dimension	Value
Length (L)	202 mm
Width (W)	4.6 mm
Height (H)	1.2 mm
Fixing height (H2)	6.9 mm
Fixing length (L2)	11.6 mm
Support disc diameter	16.0 mm
Mounting hole diameter range	4.5–5.0 mm
Compatible panel thickness	0.7–3.0 mm
Bundle diameter range	4.0–45.0 mm

Installation Notes

Select a Ø4.5–5.0 mm round mounting hole in a panel 0.7–3.0 mm thick.
Align the push-mount element with the hole and press it into the panel until seated.
Wrap the cable tie around the bundle, insert the strap through the locking head and tighten it.
Reposition the tie head as required to align the harness routing.

The 225 N value specifies minimum cable tie tensile strength; it is not a panel-fixing pull-out load or installation tension.

Aplicações

Automotive wiring harnesses and vehicle electrical systems.
Vehicle interior cable routing.
Harness assemblies for transportation equipment.
Panel-mounted cable routing in industrial machinery and control equipment.
Electrical equipment and appliance wiring.

Ordering Information

Specify 156-00618, the required quantity, the round mounting-hole diameter, panel thickness and bundle diameter when requesting a quotation. This model has a black PA66HS tie and PA66HIRHS fixing element, a 202 mm tie length, and a Ø16.0 mm support disc.