BZL L-Type Ball-Lock Stainless Steel Cable Ties
L-type stainless steel ball-lock cable ties in uncoated BZL and coated BZLP versions.
- Listed steel grades: 201, 304 and 316.
- 20 width/length entries with width-specific strength and tools.
- BZL working temperature: −80 °C to +538 °C.
- BZLP working temperature: −80 °C to +150 °C.
- Widths: 7.9 mm, 12 mm.
Visão Geral
The YOCL ELECTRIC BZL L-Type Ball-Lock Stainless Steel Cable Ties use a self-locking ball mechanism. L-type stainless steel ball-lock cable ties in uncoated BZL and coated BZLP versions.
Características
- Ball-lock construction: Self-locking band fastening.
- Material options: Stainless steel grades 201, 304 and 316, as listed.
- Width-specific selection: Separate tensile-strength and tooling information for each band width.
- Finish selection: Uncoated BZL and coated BZLP versions; coating provides an additional contact barrier at band edges.
Especificações Técnicas
| Parameter | Specification |
|---|---|
| Series | BZL / BZLP |
| Locking mechanism | Ball-lock self-locking |
| Stainless steel grades listed | 201; 304; 316 |
| Widths | 7.9 mm; 12 mm |
| Listed thickness options | 0.25 mm; 0.30 mm |
| BZL finish / temperature | Uncoated; −80 °C to +538 °C |
| BZLP finish / temperature | Coated; −80 °C to +150 °C |
| Coating materials listed | Polyester; epoxy |
The source does not assign individual steel grades or thickness options to separate order codes or strength-test configurations.
Dimensão
Width, Strength and Tools
| Width W (mm) | Thickness options (mm) | Minimum tensile strength (N) | Listed strength (lbf) | Recommended tools |
|---|---|---|---|---|
| 7.9 | 0.25; 0.30 | 2,220 | 500 | CT02; HT-338 |
| 12 | 0.25; 0.30 | 3,115 | 700 | CT05; LQA; C001 |
The N and lbf figures are reproduced as supplied, rather than presented as exact unit conversions.
Size Table
Primary dimensions are in millimetres. Inch dimensions are rounded conversions.
| Size W × L (mm) | Width W (mm) | Length L (mm) | Width (inch) | Length (inch) |
|---|---|---|---|---|
| 7.9×200 | 7.9 | 200 | 0.31 | 7.9 |
| 7.9×250 | 7.9 | 250 | 0.31 | 9.8 |
| 7.9×300 | 7.9 | 300 | 0.31 | 11.8 |
| 7.9×350 | 7.9 | 350 | 0.31 | 13.8 |
| 7.9×400 | 7.9 | 400 | 0.31 | 15.7 |
| 7.9×450 | 7.9 | 450 | 0.31 | 17.7 |
| 7.9×500 | 7.9 | 500 | 0.31 | 19.7 |
| 7.9×550 | 7.9 | 550 | 0.31 | 21.7 |
| 7.9×600 | 7.9 | 600 | 0.31 | 23.6 |
| 7.9×800 | 7.9 | 800 | 0.31 | 31.5 |
| 12×300 | 12 | 300 | 0.47 | 11.8 |
| 12×350 | 12 | 350 | 0.47 | 13.8 |
| 12×400 | 12 | 400 | 0.47 | 15.7 |
| 12×500 | 12 | 500 | 0.47 | 19.7 |
| 12×700 | 12 | 700 | 0.47 | 27.6 |
| 12×800 | 12 | 800 | 0.47 | 31.5 |
| 12×900 | 12 | 900 | 0.47 | 35.4 |
| 12×1000 | 12 | 1000 | 0.47 | 39.4 |
| 12×1200 | 12 | 1200 | 0.47 | 47.2 |
| 12×1500 | 12 | 1500 | 0.47 | 59.1 |
Thickness conversions: 0.25 mm ≈ 0.010 inch; 0.30 mm ≈ 0.012 inch; 0.40 mm ≈ 0.016 inch, where listed. Bundle diameter D is illustrated but no numerical bundle range is provided.
Informações de Encomenda
Specify the series, width, length, thickness and stainless steel grade. Check the width-specific recommended tool and minimum tensile strength in the table above.
Specify BZL for uncoated or BZLP for coated material. Include the required coating and working temperature.