BZQ Double-Wrap Ball-Lock Stainless Steel Cable Ties
Uncoated stainless steel double-wrap ball-lock cable ties for tensioning non-resilient bundles; the band passes through the buckle twice.
- Listed steel grades: 201, 304 and 316.
- 15 width/length entries with width-specific strength and tools.
- Working temperature: −80 °C to +538 °C.
- Widths: 7.9 mm, 12.7 mm, 16 mm.
Visão Geral
The YOCL ELECTRIC BZQ Double-Wrap Ball-Lock Stainless Steel Cable Ties use a self-locking ball mechanism. Uncoated stainless steel double-wrap ball-lock cable ties for tensioning non-resilient bundles; the band passes through the buckle twice.
Double wrapping is part of the specified construction: route the band through the buckle twice before final tightening. Choose a length that accommodates both passes.
Características
- Ball-lock construction: Self-locking band fastening.
- Material options: Stainless steel grades 201, 304 and 316, as listed.
- Width-specific selection: Separate tensile-strength and tooling information for each band width.
- Double-wrap routing: Two passes through the buckle for fastening non-resilient bundles.
Especificações Técnicas
| Parameter | Specification |
|---|---|
| Series | BZQ |
| Locking mechanism | Ball-lock self-locking |
| Stainless steel grades listed | 201; 304; 316 |
| Widths | 7.9 mm; 12.7 mm; 16 mm |
| Listed thickness options | 0.25 mm; 0.30 mm; 0.40 mm |
| Finish | Uncoated metal |
| Working temperature | −80 °C to +538 °C |
| Band routing | Two passes through the buckle |
The source does not assign individual steel grades or thickness options to separate order codes or strength-test configurations.
Dimensão
Width, Strength and Tools
| Width W (mm) | Thickness options (mm) | Minimum tensile strength (N) | Listed strength (lbf) | Recommended tools |
|---|---|---|---|---|
| 7.9 | 0.25 | 2,800 | 630 | HT-338 |
| 12.7 | 0.30; 0.40 | 4,600 | 1050 | CT02 |
| 16 | 0.30; 0.40 | 5,500 | 1250 | LQB; C002 |
The N and lbf figures are reproduced as supplied, rather than presented as exact unit conversions.
Size Table
Primary dimensions are in millimetres. Inch dimensions are rounded conversions.
| Size W × L (mm) | Width W (mm) | Length L (mm) | Width (inch) | Length (inch) |
|---|---|---|---|---|
| 7.9×400 | 7.9 | 400 | 0.31 | 15.7 |
| 7.9×500 | 7.9 | 500 | 0.31 | 19.7 |
| 7.9×750 | 7.9 | 750 | 0.31 | 29.5 |
| 7.9×900 | 7.9 | 900 | 0.31 | 35.4 |
| 7.9×1000 | 7.9 | 1000 | 0.31 | 39.4 |
| 12.7×500 | 12.7 | 500 | 0.50 | 19.7 |
| 12.7×600 | 12.7 | 600 | 0.50 | 23.6 |
| 12.7×750 | 12.7 | 750 | 0.50 | 29.5 |
| 12.7×1050 | 12.7 | 1050 | 0.50 | 41.3 |
| 12.7×1350 | 12.7 | 1350 | 0.50 | 53.1 |
| 16×500 | 16 | 500 | 0.63 | 19.7 |
| 16×600 | 16 | 600 | 0.63 | 23.6 |
| 16×750 | 16 | 750 | 0.63 | 29.5 |
| 16×1050 | 16 | 1050 | 0.63 | 41.3 |
| 16×1350 | 16 | 1350 | 0.63 | 53.1 |
Thickness conversions: 0.25 mm ≈ 0.010 inch; 0.30 mm ≈ 0.012 inch; 0.40 mm ≈ 0.016 inch, where listed. Bundle diameter D is illustrated but no numerical bundle range is provided.
Informações de Encomenda
Specify the series, width, length, thickness and stainless steel grade. Check the width-specific recommended tool and minimum tensile strength in the table above.
Allow for the double-wrap routing when selecting length; the straight band length is not a stated maximum bundle circumference.