156-00672 Side-Mount Edge Clip Cable Tie

The YOCL ELECTRIC 156-00672 side-mount edge clip cable tie secures cables, wire harnesses, pipes and hoses directly to 3.0–6.0 mm panel edges without a mounting hole.

Outside-serrated tie for 1.0–45.0 mm bundles.
Tie dimensions: 200.0 × 4.6 × 1.3 mm; 225 N minimum tensile strength.
Pre-assembled two-piece construction with a repositionable tie head.
Integrated metal retaining element for tool-free push-on mounting.
Black PA66HS tie / PA66HIRHS fixing body; −40°C to +105°C operating temperature, UL 94 HB classification and RoHS compliance.

Запрос по этому продукту

Обзор

The YOCL ELECTRIC 156-00672 Side-Mount Edge Clip Cable Tie is a pre-assembled, two-piece fastening for routing cables, wire harnesses, pipes and hoses along 3.0–6.0 mm thick panel edges. The fixing body incorporates a metal retaining element and pushes directly onto the edge without a mounting hole, screw or adhesive base.

The 200.0 mm outside-serrated cable tie secures 1.0–45.0 mm diameter bundles and has a minimum tensile strength of 225 N. Its comparatively smooth inner strap surface reduces direct contact between the serrations and cable insulation. The tie head can be repositioned after bundling to adjust the final routing position.

Характеристики

Side-mount fixing for 3.0–6.0 mm panels: provides an edge mounting point for thicker panels within the stated range.
Metal retaining element: mechanically engages the panel edge during push-on installation.
Outside-serrated strap: presents a comparatively smooth surface to the bundle.
Repositionable tie head: allows final harness alignment after bundling.
Non-releasable tie: secures cable groups within a 1.0–45.0 mm bundle range.
Heat-stabilized materials: PA66HS tie with a high-impact modified PA66HIRHS fixing body.

Технические характеристики

Parameter	Specification
Brand	YOCL ЭЛЕКТРИК
Part number	156-00672
Product type	Side-mount edge clip cable tie
Construction	Pre-assembled, two-piece assembly
Fixing method	Side-mount edge clip
Panel thickness	3.0–6.0 mm
Bundle diameter	1.0–45.0 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized Polyamide 6.6
Fixing element body material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Retaining element	Integrated metal component
Colour	Black
Serration	Outside serrated
Releasable	No
Tie head positioning	Repositionable after bundling
Operating temperature	−40°C to +105°C
Flammability classification	UL 94 HB
RoHS	Compliant
Mounting hole required	No
Installation	Tool-free push-on edge mounting

Размеры

Размеры	Value
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Strap thickness (T) / height (H)	1.3 mm
Fixing height (H2)	14.6 mm
Fixing length (L2)	14.8 mm
Fixing width (W2)	17.3 mm
Compatible panel thickness	3.0–6.0 mm
Bundle diameter range	1.0–45.0 mm

Installation Notes

Select a compatible panel edge 3.0–6.0 mm thick.
Position the clip at the required location and push it onto the edge.
Check that the metal retaining element is engaged with the panel.
Wrap the cable tie around the cable, harness, pipe or hose bundle, insert the strap through the locking head and tighten it.
Reposition the tie head as required for final routing.

The 225 N value is the minimum tensile strength of the cable tie; it is not an edge-clip pull-off load or installation tension.

Применение

Automotive harness routing along compatible panel edges.
Vehicle interior electrical assemblies.
Pipe and hose fixing along panel edges.
Cable management in industrial machinery and electrical equipment.
Panel-building and transportation-equipment harness assembly.

Ordering Information

Specify 156-00672, the required quantity, panel thickness and bundle diameter when requesting a quotation. This model uses a black PA66HS tie and PA66HIRHS fixing body, an integrated metal retaining element, and a 200.0 mm outside-serrated cable tie for 3.0–6.0 mm panels.