Genel Bakış
The YOCL ELECTRIC 156-00619 Diskli Yuvarlak Delik İtme Tipi Kablo Bağı secures cable bundles and wire harnesses directly to panels. The pre-assembled two-piece design combines an inside-serrated cable tie with a fir-tree fixing element and a Ø16.0 mm support disc.
It fits Ø7.7–8.0 mm round holes in panels 0.8–6.0 mm thick and accepts Ø5.0–45.0 mm bundles. The tie measures 200.0 × 4.6 × 1.2 mm and has a minimum tensile strength of 225 N. Its head can be repositioned after bundling for final routing alignment.
Özellikler
- Fir-tree push mount installs into compatible round panel holes without a separate mounting screw.
- Ø16.0 mm support disc contacts the panel surface to help stabilize the fixing point.
- Pre-assembled two-piece construction allows the tie head to be repositioned after bundling.
- Inside-serrated strap with a non-releasable plastic-pawl closure; minimum tensile strength of 225 N.
- PA66HS cable tie and PA66HIRHS fixing element, both in black.
- UL 94 V-2 flammability classification; RoHS compliant.
Teknik Özellikler
Boyut
Kurulum Notları
- Use a Ø7.7–8.0 mm round mounting hole in a panel 0.8–6.0 mm thick.
- Push the fir-tree fixing into the panel and confirm that the Ø16.0 mm support disc is seated against the surface.
- Wrap the tie around the bundle, feed the strap through the locking head and tighten.
- Reposition the tie head if needed for final routing, then check the bundle and fixing.
The fixing is also suitable for compatible threaded holes.
Uygulamalar
- Automotive wire harnesses and vehicle electrical systems.
- Panel-mounted cable routing in electrical equipment.
- Industrial machinery and control-panel wiring.
Sipariş Bilgileri
For enquiries, specify part number 156-00619, quantity, mounting-hole diameter, panel thickness and bundle diameter.
