156-00615 Top-Mount Edge Clip Cable Tie

The YOCL ELECTRIC 156-00615 Top-Mount Edge Clip Cable Tie secures cables, wire harnesses, hoses and tubes directly to panel edges using a pre-assembled two-piece fixing.

Push-on clip for 1.0–3.0 mm panel edges; no mounting hole, screw or adhesive base required.
Black inside-serrated tie: 200.0 × 4.6 × 1.2 mm, with a 4.0–45.0 mm bundle diameter range.
Minimum cable tie tensile strength: 225 N; non-releasable tie with a repositionable head.
PA66HS tie and PA66HIRHS fixing element with an integrated metal retainer.
Operating temperature −40°C to +105°C; UL 94 HB flammability classification.

Bu ürün hakkında bilgi alın

Genel Bakış

The YOCL ELECTRIC 156-00615 Top-Mount Edge Clip Cable Tie is a pre-assembled two-piece fixing for securing cables, wire harnesses, hoses and tubes to panel edges. Its push-on clip fits panels 1.0–3.0 mm thick without a mounting hole, screw or adhesive fixing base. The top-mount configuration provides a defined routing position at the panel edge.

The black, inside-serrated tie measures 200.0 mm long, 4.6 mm wide and 1.2 mm thick, accommodating bundle diameters of 4.0–45.0 mm. An integrated metal retaining element engages the panel edge. The tie head can be repositioned after bundling for final harness alignment.

Özellikler

Top-mount edge fixing: Provides a defined cable-routing point on a compatible panel edge.
Direct push-on installation: Fits 1.0–3.0 mm panels without drilling, a mounting screw or an adhesive base.
Integrated metal retainer: Provides mechanical engagement with the panel edge.
Inside-serrated tie: Accommodates 4.0–45.0 mm bundles with a minimum cable tie tensile strength of 225 N.
Repositionable head: Two-piece construction allows final head positioning after bundling; the tie is non-releasable.
Heat-stabilized materials: Combines a PA66HS tie with a high-impact modified, heat-stabilized PA66HIRHS fixing element.

Teknik Özellikler

Parametre	Teknik Özellikler
Marka	YOCL ELEKTRİK
Part number	156-00615
Product type	Cable tie with edge fixing element
Yapı	Pre-assembled, two-piece
Fixing method	Top-mount edge clip
Panel thickness	1.0–3.0 mm
Bundle diameter	4.0–45.0 mm
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Strap thickness (T) / height (H)	1.2 mm
Fixing height (H2)	16.0 mm
Fixing length (L2)	14.0 mm
Fixing width (W2)	11.5 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HS — heat-stabilized polyamide 6.6
Fixing element material	PA66HIRHS — high-impact modified, heat-stabilized polyamide 6.6
Retaining element	Integrated metal retaining element
Colour	Black
Serration	Inside serrated
Releasable	No
Tie head positioning	Repositionable after bundling
Operating temperature	−40°C to +105°C
Fixing element operating temperature	−40°C to +105°C
Flammability classification	UL 94 HB
RoHS	Compliant
Mounting hole required	No
Installation	Push-on
Panel-mounting tool required	No

Installation Notes

Select a panel edge 1.0–3.0 mm thick and push the fixing clip onto it by hand. Check that the metal retaining element is engaged. Wrap the tie around a bundle within the 4.0–45.0 mm diameter range, feed the strap through the locking head and tighten it. Reposition the tie head as needed for final routing, then check that the fixing and bundle are secured.

Uygulamalar

Automotive wire harnesses and vehicle body electrical assemblies.
Panel-edge cable routing in electrical equipment and control panels.
Cable, hose and tube fixing along compatible panel edges.
Industrial machinery, transportation equipment and wire-harness manufacturing.

Sipariş Bilgileri

Specify part number 156-00615 and the required quantity when requesting a quotation. Check the panel thickness, bundle diameter, operating temperature and available fixing space against the listed specifications.