TJ Clamping Marine Cable Gland
The TJ clamping marine cable gland series is listed in 10 sizes for cable ranges from 5–7 mm through 48–57 mm. Select by the complete model code, entry thread and cable diameter.
- Model-specific entry threads range from M16 × 1 to M71 × 2 in the supplied tables.
- Model-specific d, d1, D, D1, H and H1 values follow the user-selected 11.41.14 catalogue page.
- That page describes a brass D part, steel D1 part and NBR clamping ring.
Genel Bakış
The TJ Clamping Marine Cable Gland is a catalogue series for cable entry and fastening. The two supplied pages list the same 10 TJ size groups and cable ranges, from TJ-8 for 5–7 mm cable to TJ-58 for 48–57 mm cable.
The two supplied pages disagree on several secondary dimensions and materials. The user selected the 11.41.14 page as the specification source; all values below follow that page.
Özellikler
- Clamping-type gland configuration identified in the source.
- Ten listed size groups with cable ranges for model selection.
- Entry thread and overall H dimension are stated for each size.
- The selected catalogue page describes a brass D part, steel D1 part and NBR clamping ring.
Teknik Özellikler
| Parameter | Catalogue information |
|---|---|
| Series | TJ clamping type |
| Listed gland sizes | TJ-8, TJ-13, TJ-16, TJ-19, TJ-24, TJ-28, TJ-34, TJ-42, TJ-50, TJ-58 |
| Cable ranges | 5–7 mm to 48–57 mm, depending on model |
| Entry threads | Metric sizes listed in table |
| D part | Brass, according to selected catalogue page |
| D1 part | Steel, according to selected catalogue page |
| Clamping ring | NBR, according to selected catalogue page |
| Stated protection | IP54 within the specified clamping range (catalogue claim) |
| Stated static temperature range | −40 to +110 °C |
| Stated dynamic temperature range | −20 to +80 °C |
Boyut
All values below follow the user-selected 11.41.14 catalogue page. d, D1, H and H1 are in millimetres; D and d1 are the catalogue’s threaded dimensions where prefixed with M.
| Code | Gland size | d | D | d1 | D1 | H | H1 | Cable range (mm) |
|---|---|---|---|---|---|---|---|---|
| VO-TJ8 | TJ-8 | 8 | M16 × 1 | M13 | 20 | 32 | 3 | 5–7 |
| VO-TJ13 | TJ-13 | 13 | M20 × 1 | M17 | 24 | 35 | 8 | 6–12 |
| VO-TJ16 | TJ-16 | 16 | M27 × 1.5 | M22 | 32 | 40 | 8 | 11–15 |
| VO-TJ19 | TJ-19 | 19 | M30 × 1.5 | M24 | 35 | 42 | 8 | 14–18 |
| VO-TJ24 | TJ-24 | 24 | M35 × 1.5 | M30 | 41 | 44 | 8 | 17–23 |
| VO-TJ28 | TJ-28 | 28 | M42 × 2 | M35 | 49 | 46 | 8 | 22–27 |
| VO-TJ34 | TJ-34 | 34 | M47 × 2 | M42 | 53 | 49 | 8 | 26–33 |
| VO-TJ42 | TJ-42 | 42 | M55 × 2 | M50 | 60 | 54 | 8 | 32–41 |
| VO-TJ50 | TJ-50 | 50 | M62 × 2 | M58 | 69 | 56 | 8 | 40–49 |
| VO-TJ58 | TJ-58 | 58 | M71 × 2 | M66 | 80 | 56 | 8 | 48–57 |
Seçim Kılavuzu
Choose the model by the actual cable diameter and matching equipment entry thread. Check the d1, D1 and H1 dimensions against the current drawing before machining an entry.
Sipariş Bilgileri
Provide the TJ size or complete code, required quantity, cable diameter and equipment entry thread when requesting a quotation.
Boyut
