Tổng quan
The YOCL ELECTRIC 156-01190 360° Rotatable Cable Tie with Tube Clip attaches additional cables, wire harnesses or hoses to an existing tube, hose or harness. The clip accommodates compatible attachment outside diameters of 18.0–20.0 mm, while the cable tie secures a separate bundle with a diameter of 2.0–35.0 mm.
The pre-assembled two-piece construction has a 360° rotatable connection between the tie and fixing clip, allowing the secured bundle to be aligned in different directions relative to its attachment point. The black, inside-serrated tie measures 155.0 mm long, 4.7 mm wide and 1.35 mm thick, with a minimum cable tie tensile strength of 222 N.
Tính năng
- 18–20 mm clip attachment: Uses a compatible existing tube, hose or harness as the fixing point.
- 360° rotation: Allows the tie and secured bundle to be oriented relative to the attachment point.
- Separate bundle retention: The inside-serrated tie accommodates 2.0–35.0 mm bundle diameters.
- Pre-assembled two-piece design: Combines a PA66HS tie with a PA66HIRHS fixing element.
- No panel hole required: Clip-on mounting avoids a dedicated panel hole, mounting screw or adhesive fixing base.
- 155.0 × 4.7 × 1.35 mm tie: Provides the specified length, width and thickness for assembly planning.
Thông số kỹ thuật
Ghi chú lắp đặt
Select a compatible tube, hose or harness with an outside diameter of 18.0–20.0 mm. Clip the fixing element onto it, then position the additional bundle within the 2.0–35.0 mm diameter range. Wrap the tie around the bundle, insert the strap through the locking head and tighten it. Rotate the connection to align the route, and check that both the clip and bundle are securely retained.
Ứng dụng
- Secondary automotive wire-harness routing alongside existing tubes, hoses or harnesses.
- Tube-mounted and hose-mounted cable routing in vehicle electrical systems.
- Wire-harness manufacturing and transportation equipment.
- Cable routing in industrial machinery and electrical equipment.
Thông tin đặt hàng
Specify part number 156-01190 and the required quantity when requesting a quotation. Check both the 18.0–20.0 mm attachment diameter and the 2.0–35.0 mm bundle diameter, together with the available space for the clip and rotating connection.
