Cable ends
Material and cross-section at each end · conductor construction
Đầu nối nối cáp
Nhà sản xuất
Copper, aluminium and bimetallic connecting sleeves. Compression, pre-insulated and shear-bolt series.
Cable Splice Connectors series
Mở toàn bộ danh mục
AMB Series Aluminum Alloy Shear Bolted Connecting Tube
GL-1 Through-Type Aluminium Connecting Tube
GL-2 Series Aluminium Connecting Tube(Oil-Plugging)
GLB Series Aluminum Connecting Tube
GT-1 Through-Type Copper Connecting Sleeves
GT-2 Oil-Blocking Copper Connecting Sleeves
GTL Series Copper-Aluminium Connecting Tube
GTY Series Copper Connecting Tube
Ống nối cáp bọc cách điện dòng MJPT
Cable Splice Connectors families
| Cấu tạo | Tiêu chí lựa chọn | Tham chiếu dòng |
|---|---|---|
| Copper sleeves | Compare through-type and oil-blocking configurations by model. | GT-1 · GT-2 · GTY |
| Aluminium sleeves | Match conductor size and the sleeve drawing. | GL-1 · GL-2 · GLB |
| Bimetallic sleeves | Specify the conductor material and size at both ends. | GTL |
| Insulated & mechanical joints | Confirm insulation requirements or shear-bolt conductor compatibility. | MJPT · AMB |
Specify both ends. Then choose the joint.
Kiểm tra bản vẽ dòng sản phẩm với yêu cầu cáp và lắp đặt của bạn.
Phương pháp kết nối
Compression sleeve or mechanical shear-bolt connector
Sleeve configuration
Through-type or oil-blocking · bore dimensions · overall length
Insulation & installation
Insulation requirements · joint system · tool and installation instructions
Send your cable splice connectors
yêu cầu.
Gửi đúng model, chi tiết dây dẫn, bản vẽ lắp đặt và số lượng đặt hàng.
Chuẩn bị yêu cầu báo giáCable Splice Connectors requirements
Thống nhất thông số kỹ thuật và bằng chứng cần thiết trước khi đặt hàng.
Khám phá sản xuấtKích thước
Conductor sizes at both ends, sleeve length and bore dimensions.
Vật liệu & hoàn thiện
Chỉ định khả năng tương thích dây dẫn, vật liệu đế và bề mặt hoàn thiện.
Đánh dấu
Share your identification, branding and traceability requirements.
Packaging
Provide pack quantities, label details and shipment requirements.
OEM & PACKING
Your specification.
Kế hoạch đóng gói của bạn.
Build your cable splice connectors order around the selected models, identification and supply requirements.
Model schedule
Conductor sizes at both ends, sleeve length and bore dimensions.
Labels & identification
Provide part numbers, label artwork and any batch or traceability information required for the order.
Pack quantities
Specify quantities per model, individual packs, outer cartons and delivery destination.
Đầu nối nối cáp
buying questions.
How do I choose a cable connecting sleeve?
Specify both conductors: material, cross-section and construction. Match the sleeve to that conductor pair, then confirm preparation, tooling and any insulation or sealing requirements.
Can I use a copper sleeve for a copper-to-aluminium joint?
Do not assume this is suitable. Review a documented mixed-material connector and its installation requirements for the proposed conductor pair.
What should I include in a quotation request?
Send the exact model, conductor details, installation drawing and order quantity. Include the exact model quantities, delivery destination and required documentation.
Can you review custom labels and packaging?
Send your part numbers, label artwork, pack quantities and shipment requirements. Feasibility, sample requirements, minimum quantities and lead time are confirmed for the requested models.